I've made a stove from a canteen cup. What I did was cut the bottom off a canteen cup about a half inch up (this allows your canteen cup to fit into the up turned former canteen cup. Then remove the handles and cut out the welded/riveted section that held the handles. This is where you will feed fuel in. Lastly mark how far down your cup fit into the upturned cup/stove and drill holes around the cup on that line. now you are done and your new stove will nest in your cup and your canteen will sit in that. Wish I still had that but I gave it away to one of the other instructors when I retired. and then I found the pocket cooker stove (Sportsmans Guide).




Reply With Quote


Bookmarks