Page 2 of 2 FirstFirst 12
Results 21 to 31 of 31

Thread: Knife Sheath

  1. #21
    Senior Member doren's Avatar
    Join Date
    Jan 2009
    Location
    Tennessee
    Posts
    126

    Default

    Applying a couple of coats of Atom wax (yes, I spelled that correctly) to the raw hide should make it more resistant to water damage. I use it for my leather work and it holds up very well.

    One thing to remember though is apply it to all sides and edges of the material before stitching or riveting it together.

    Now I'm curious if it will work, I may have to go to the store later.


  2. #22
    Administrator Rick's Avatar
    Join Date
    Nov 2007
    Location
    Central Indiana
    Posts
    58,806

    Default

    Okay, I'm confused. Does the Atom wax work or not? Anything like bikini wax?
    Tracks Across the High Plains...Death on the Bombay Line...A Touch of Death and Mayhem...Dead Rock...The Griswald Mine Boys...All On Amazon Books.

  3. #23
    Senior Member doren's Avatar
    Join Date
    Jan 2009
    Location
    Tennessee
    Posts
    126

    Default

    Quote Originally Posted by Rick View Post
    Okay, I'm confused. Does the Atom wax work or not? Anything like bikini wax?
    I know it works for normal leather, but I never tried it on rawhide.

  4. #24
    Administrator Rick's Avatar
    Join Date
    Nov 2007
    Location
    Central Indiana
    Posts
    58,806

    Default

    Okay, now I get it. Thanks for the clarification.
    Tracks Across the High Plains...Death on the Bombay Line...A Touch of Death and Mayhem...Dead Rock...The Griswald Mine Boys...All On Amazon Books.

  5. #25
    leather Tanner Durlaburban's Avatar
    Join Date
    Feb 2009
    Location
    Vermont
    Posts
    37

    Default

    Quote Originally Posted by Beans View Post
    If you make a knife sheath out of rawhide, you will need to seal the outside with a waterproof substance.

    In a heavy rain, or anything that would cause the rawhide to be immersed in water will soften the rawhide and make it worthless until it dries again.

    You can also make a knife sheath out of a peice of PPV pipe by *heating the PPC pipe until it is warm enought to become moldable. Place the PPC pipe between to flat surfaces and press downward until you can slide your knife blade in the sheath and hold that position until the PPC pipe cools.

    You can press the end closed beyound the point or just leave it open. When making objects for use in wet areas I always leave a drain hole in the lowest portion of the sheath or holster.

    This type of sheath is great for packing your knifes in an area where if the blade cuts through a sheath, like inside a pack, it may cause you or your equipment damage

    * you can heat the PPC piping in an oven or with a hand held heat source. I have an electric heat gun that works just fine.

    NEVER EVER NEVER heat up PVC OR PPC piping!!!! these plastics give of fumes when heated that can kill you in minutes!!! ask any firefighter!
    "Speek softly and carry a Big stick"
    - Roosevelt

  6. #26

  7. #27

  8. #28

  9. #29

  10. #30

  11. #31

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •