Results 1 to 11 of 11

Thread: Need Help with my first knife making project...

  1. #1
    Neo-Numptie DOGMAN's Avatar
    Join Date
    Apr 2008
    Location
    cyber space
    Posts
    2,026

    Default Need Help with my first knife making project...

    So, I have decided to jump into the world of knifemaking, and I am working on 2 knives as Christmas presents- 1 for my Dad, and 1 for my father-in-law.

    So, far its going well. I started with a couple of pry bars, and have grinded and grinded for 2 days now and have a couple of full tang blades that I am happy with their shape. Sort of shaped like a classic puukko bush knife.

    Anyway, I want to split a deer antler in half and mount the antler halves to the tang. What is the easiest way to mount the handles? I have looked at several different rivet/fastner kits but i don't know which will work best and it easiest to install. I just have basic tools. Thanks for any advice- please post links to what you'd recommend. Any installation tips will be appreciated.
    The way of the canoe is the way of the wilderness and of a freedom almost forgotten- Sigurd Olson

    Give me winter, give me dogs... you can keep the rest- Knud Rasmussen


  2. #2
    Neo-Numptie DOGMAN's Avatar
    Join Date
    Apr 2008
    Location
    cyber space
    Posts
    2,026

    Default

    Also, I have been doing this bare handed, and anytime the steel started to warm-up and get a little hot, I have dropped the steel in a bucket of cold water. I've been doing this so, hopefully I wont have to re-temper the blades. Is this a sound practice (i.e...will this work)?
    The way of the canoe is the way of the wilderness and of a freedom almost forgotten- Sigurd Olson

    Give me winter, give me dogs... you can keep the rest- Knud Rasmussen

  3. #3
    Senior Member randyt's Avatar
    Join Date
    Jan 2010
    Location
    tip of the mitt
    Posts
    5,255

    Default

    The old grind and dip method should be fine as l;long as the steel is heat treated where it needs to be for a knife blade. For fastening the handles I would use some brass brazing rod for pins and some 5 ton epoxy.

  4. #4
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,818

    Default

    Dogman - the most difficult part of your handles will be splitting them. Make sure they are perfectly flat on the cut sides that will attach to the tang of the knife. As Randyt said, brazing rods work well. Here's a vid I did quite a while ago. It's about making micarta, but at about 4 minutes in, it shows one way to attach handles. I do it a little differently now (small bandsaw makes it sooooo much easier), but it will give you a good idea on at least one way. After you split the antlers you may want to trace the outline onto your tang and grind or file away the excess. In the vid I use Gorilla Glue, but Devcon epoxy works very well.

    Can't Means Won't

    My Youtube Channel

  5. #5
    Lone Wolf COWBOYSURVIVAL's Avatar
    Join Date
    May 2009
    Location
    In The Swamp Sumter, S.C.
    Posts
    4,514

    Default

    Here is my first and only full tang antler scales. I'd say it is the most challenging scales you could make. Take a look at this "old" thread WOW almost 20k views! Is that a forum record? One other tip is something new I have played with and that is leather liners stabilized with permatex gasket shellac, works for sclaes that ain't dead flat. Good luck!

    http://www.wilderness-survival.net/f...f+spring+knife
    Keep in mind the problem may be extremely complicated, though the "Fix" is often simple...

    "Teaching a child to fish is the "original" introduction to all that is wild." CS

    "How can you tell a story that has no end?" Doc Carlson

  6. #6

  7. #7

  8. #8

    Default

    audiobookkeeper.rucottagenet.rueyesvision.rueyesvisions.comfactoringfee.rufilmzones.rugadwall.rugaffertape.rugageboard.rugagrule.rugallduct.rugalvanometric.rugangforeman.rugangwayplatform.rugarbagechute.ru
    gardeningleave.rugascautery.rugashbucket.rugasreturn.rugatedsweep.rugaugemodel.rugaussianfilter.rugearpitchdiameter.rugeartreating.rugeneralizedanalysis.rugeneralprovisions.rugeophysicalprobe.rugeriatricnurse.rugetintoaflap.rugetthebounce.ru
    habeascorpus.ruhabituate.ruhackedbolt.ruhackworker.ruhadronicannihilation.ruhaemagglutinin.ruhailsquall.ruhairysphere.ruhalforderfringe.ruhalfsiblings.ruhallofresidence.ruhaltstate.ruhandcoding.ruhandportedhead.ruhandradar.ru
    handsfreetelephone.ruhangonpart.ruhaphazardwinding.ruhardalloyteeth.ruhardasiron.ruhardenedconcrete.ruharmonicinteraction.ruhartlaubgoose.ruhatchholddown.ruhaveafinetime.ruhazardousatmosphere.ruheadregulator.ruheartofgold.ruheatageingresistance.ruheatinggas.ru
    heavydutymetalcutting.rujacketedwall.rujapanesecedar.rujibtypecrane.rujobabandonment.rujobstress.rujogformation.rujointcapsule.rujointsealingmaterial.rujournallubricator.rujuicecatcher.rujunctionofchannels.rujusticiablehomicide.rujuxtapositiontwin.rukaposidisease.ru
    keepagoodoffing.rukeepsmthinhand.rukentishglory.rukerbweight.rukerrrotation.rukeymanassurance.rukeyserum.rukickplate.rukillthefattedcalf.rukilowattsecond.rukingweakfish.rukinozones.rukleinbottle.rukneejoint.ruknifesethouse.ru
    knockonatom.ruknowledgestate.rukondoferromagnet.rulabeledgraph.rulaborracket.rulabourearnings.rulabourleasing.rulaburnumtree.rulacingcourse.rulacrimalpoint.rulactogenicfactor.rulacunarycoefficient.ruladletreatediron.rulaggingload.rulaissezaller.ru
    lambdatransition.rulaminatedmaterial.rulammasshoot.rulamphouse.rulancecorporal.rulancingdie.rulandingdoor.rulandmarksensor.rulandreform.rulanduseratio.rulanguagelaboratory.rulargeheart.rulasercalibration.rulaserlens.rulaserpulse.ru

  9. #9

    Default

    laterevent.rulatrinesergeant.rulayabout.ruleadcoating.ruleadingfirm.rulearningcurve.ruleaveword.rumachinesensible.rumagneticequator.rumagnetotelluricfield.rumailinghouse.rumajorconcern.rumammasdarling.rumanagerialstaff.rumanipulatinghand.ru
    manualchoke.rumedinfobooks.rump3lists.runameresolution.runaphtheneseries.runarrowmouthed.runationalcensus.runaturalfunctor.runavelseed.runeatplaster.runecroticcaries.runegativefibration.runeighbouringrights.ruobjectmodule.ruobservationballoon.ru
    obstructivepatent.ruoceanmining.ruoctupolephonon.ruofflinesystem.ruoffsetholder.ruolibanumresinoid.ruonesticket.rupackedspheres.rupagingterminal.rupalatinebones.rupalmberry.rupapercoating.ruparaconvexgroup.ruparasolmonoplane.ruparkingbrake.ru
    partfamily.rupartialmajorant.ruquadrupleworm.ruqualitybooster.ruquasimoney.ruquenchedspark.ruquodrecuperet.rurabbetledge.ruradialchaser.ruradiationestimator.rurailwaybridge.rurandomcoloration.rurapidgrowth.rurattlesnakemaster.rureachthroughregion.ru
    readingmagnifier.rurearchain.rurecessioncone.rurecordedassignment.rurectifiersubstation.ruredemptionvalue.rureducingflange.rureferenceantigen.ruregeneratedprotein.rureinvestmentplan.rusafedrilling.rusagprofile.rusalestypelease.rusamplinginterval.rusatellitehydrology.ru
    scarcecommodity.ruscrapermat.ruscrewingunit.ruseawaterpump.rusecondaryblock.rusecularclergy.ruseismicefficiency.ruselectivediffuser.rusemiasphalticflux.rusemifinishmachining.ruspicetrade.ruspysale.rustungun.rutacticaldiameter.rutailstockcenter.ru
    tamecurve.rutapecorrection.rutappingchuck.rutaskreasoning.rutechnicalgrade.rutelangiectaticlipoma.rutelescopicdamper.rutemperateclimate.rutemperedmeasure.rutenementbuilding.rutuchkasultramaficrock.ruultraviolettesting.ru

  10. #10

  11. #11

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •