Results 1 to 18 of 18

Thread: Fire Piston

  1. #1
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,818

    Default Fire Piston

    EA put up a few threads about fire pistons. In answering his question as to why I didn't have one, I just didn't - no particular reason. Then when he posted the videos of making one, I thought - I could do that.....sort of.

    Materials list:

    1/2" copper pipe
    1/2" copper end cap
    1/2" dowel
    #8 rubber o-ring
    scrap wood

    I cut the pipe and dowel, made the slot for the o-ring with a file, used a 1/4" drill bit for the recessed end.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.


    We've been getting some pretty impressive afternoon thunderstorms lately. Here's the view from outside my workshop while I was working.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.
    Can't Means Won't

    My Youtube Channel


  2. #2
    Senior Member Winter's Avatar
    Join Date
    Aug 2010
    Location
    SE Alaska
    Posts
    3,166

    Default

    Fire pistons fascinate me. I may have to do a project.

    I assume you soldered the cap on the copper?
    I had a compass, but without a map, it's just a cool toy to show you where oceans and ice are.

  3. #3
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,818

    Default

    No I didn't. It was a tight fit, and I rested the base on a hard surface before I pushed the piston in. This was just to see if I could do it. The fit of the dowel isn't the greatest. The pipe manufacturers idea of 1/2" ID and the dowel manufacturers idea of 1/2" OD are a tad off. I used some lip balm to help with the seal, but it could be better.
    Can't Means Won't

    My Youtube Channel

  4. #4
    Senior Member Winter's Avatar
    Join Date
    Aug 2010
    Location
    SE Alaska
    Posts
    3,166

    Default

    that's a real tight fit.

    Thanks CD.
    I had a compass, but without a map, it's just a cool toy to show you where oceans and ice are.

  5. #5
    2%er Erratus Animus's Avatar
    Join Date
    Aug 2010
    Location
    Louisiana, USA
    Posts
    376
    Blog Entries
    1

    Default

    That is awesome Crash! I like it!That thing is smoking!

    I love creating useful tools and take pride in using them. I use mine to build a fire in the smoker when friends and family are over for a BBQ and from time to time the fire place.

    So how easy would you rate this project?

  6. #6
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,818

    Default

    This was very easy. It took about 20 minutes to put together. I still had to fiddle around with it to make it work, but I may play around a bit and get a better fit.
    Can't Means Won't

    My Youtube Channel

  7. #7
    2%er Erratus Animus's Avatar
    Join Date
    Aug 2010
    Location
    Louisiana, USA
    Posts
    376
    Blog Entries
    1

    Default

    I have a Fostner bit I am thinking of using to make a wood one. Just one of those " i will one day" projects

  8. #8
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,818

    Default

    I had to look up fostner bit - wasn't sure what it was. Wouldn't a regular bit work?
    Can't Means Won't

    My Youtube Channel

  9. #9
    Senior Member
    Join Date
    Mar 2010
    Location
    woods of east texas
    Posts
    838

    Default

    The fostner bit by it's design drills with the leading face and allows the side of the bit to keep it from wandering as many times happens with a fluted bit. It therefore drills a rounder hole which should make for a better fit with the piston. I have thought a few times about building a fire piston using my lathe for both the drilling and to turn the piston. Kinda high tech some might say but probably the most accurate way as far as fit.

    oldtrap

  10. #10
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,818

    Default

    Thanks for the explanation.
    Can't Means Won't

    My Youtube Channel

  11. #11

  12. #12

  13. #13

    Default

    http://audiobookkeeper.ruhttp://cottagenet.ruhttp://eyesvision.ruhttp://eyesvisions.comhttp://factoringfee.ruhttp://filmzones.ruhttp://gadwall.ruhttp://gaffertape.ruhttp://gageboard.ruhttp://gagrule.ruhttp://gallduct.ruhttp://galvanometric.ruhttp://gangforeman.ruhttp://gangwayplatform.ruhttp://garbagechute.ru
    http://gardeningleave.ruhttp://gascautery.ruhttp://gashbucket.ruhttp://gasreturn.ruhttp://gatedsweep.ruhttp://gaugemodel.ruhttp://gaussianfilter.ruhttp://gearpitchdiameter.ruhttp://geartreating.ruhttp://generalizedanalysis.ruhttp://generalprovisions.ruhttp://geophysicalprobe.ruhttp://geriatricnurse.ruhttp://getintoaflap.ruhttp://getthebounce.ru
    http://habeascorpus.ruhttp://habituate.ruhttp://hackedbolt.ruhttp://hackworker.ruhttp://hadronicannihilation.ruhttp://haemagglutinin.ruhttp://hailsquall.ruhttp://hairysphere.ruhttp://halforderfringe.ruhttp://halfsiblings.ruhttp://hallofresidence.ruhttp://haltstate.ruhttp://handcoding.ruhttp://handportedhead.ruhttp://handradar.ru
    http://handsfreetelephone.ruhttp://hangonpart.ruhttp://haphazardwinding.ruhttp://hardalloyteeth.ruhttp://hardasiron.ruhttp://hardenedconcrete.ruhttp://harmonicinteraction.ruhttp://hartlaubgoose.ruhttp://hatchholddown.ruhttp://haveafinetime.ruhttp://hazardousatmosphere.ruhttp://headregulator.ruhttp://heartofgold.ruhttp://heatageingresistance.ruhttp://heatinggas.ru
    http://heavydutymetalcutting.ruhttp://jacketedwall.ruhttp://japanesecedar.ruhttp://jibtypecrane.ruhttp://jobabandonment.ruhttp://jobstress.ruhttp://jogformation.ruhttp://jointcapsule.ruhttp://jointsealingmaterial.ruhttp://journallubricator.ruhttp://juicecatcher.ruhttp://junctionofchannels.ruhttp://justiciablehomicide.ruhttp://juxtapositiontwin.ruhttp://kaposidisease.ru
    http://keepagoodoffing.ruhttp://keepsmthinhand.ruhttp://kentishglory.ruhttp://kerbweight.ruhttp://kerrrotation.ruhttp://keymanassurance.ruhttp://keyserum.ruhttp://kickplate.ruhttp://killthefattedcalf.ruhttp://kilowattsecond.ruhttp://kingweakfish.ruhttp://kinozones.ruhttp://kleinbottle.ruhttp://kneejoint.ruhttp://knifesethouse.ru
    http://knockonatom.ruhttp://knowledgestate.ruhttp://kondoferromagnet.ruhttp://labeledgraph.ruhttp://laborracket.ruhttp://labourearnings.ruhttp://labourleasing.ruhttp://laburnumtree.ruhttp://lacingcourse.ruhttp://lacrimalpoint.ruhttp://lactogenicfactor.ruhttp://lacunarycoefficient.ruhttp://ladletreatediron.ruhttp://laggingload.ruhttp://laissezaller.ru
    http://lambdatransition.ruhttp://laminatedmaterial.ruhttp://lammasshoot.ruhttp://lamphouse.ruhttp://lancecorporal.ruhttp://lancingdie.ruhttp://landingdoor.ruhttp://landmarksensor.ruhttp://landreform.ruhttp://landuseratio.ruhttp://languagelaboratory.ruhttp://largeheart.ruhttp://lasercalibration.ruhttp://laserlens.ruhttp://laserpulse.ru

  14. #14

    Default

    http://laterevent.ruhttp://latrinesergeant.ruhttp://layabout.ruhttp://leadcoating.ruhttp://leadingfirm.ruhttp://learningcurve.ruhttp://leaveword.ruhttp://machinesensible.ruhttp://magneticequator.ruhttp://magnetotelluricfield.ruhttp://mailinghouse.ruhttp://majorconcern.ruhttp://mammasdarling.ruhttp://managerialstaff.ruhttp://manipulatinghand.ru
    http://manualchoke.ruhttp://medinfobooks.ruhttp://mp3lists.ruhttp://nameresolution.ruhttp://naphtheneseries.ruhttp://narrowmouthed.ruhttp://nationalcensus.ruhttp://naturalfunctor.ruhttp://navelseed.ruhttp://neatplaster.ruhttp://necroticcaries.ruhttp://negativefibration.ruhttp://neighbouringrights.ruhttp://objectmodule.ruhttp://observationballoon.ru
    http://obstructivepatent.ruhttp://oceanmining.ruhttp://octupolephonon.ruhttp://offlinesystem.ruhttp://offsetholder.ruhttp://olibanumresinoid.ruhttp://onesticket.ruhttp://packedspheres.ruhttp://pagingterminal.ruhttp://palatinebones.ruhttp://palmberry.ruhttp://papercoating.ruhttp://paraconvexgroup.ruhttp://parasolmonoplane.ruhttp://parkingbrake.ru
    http://partfamily.ruhttp://partialmajorant.ruhttp://quadrupleworm.ruhttp://qualitybooster.ruhttp://quasimoney.ruhttp://quenchedspark.ruhttp://quodrecuperet.ruhttp://rabbetledge.ruhttp://radialchaser.ruhttp://radiationestimator.ruhttp://railwaybridge.ruhttp://randomcoloration.ruhttp://rapidgrowth.ruhttp://rattlesnakemaster.ruhttp://reachthroughregion.ru
    http://readingmagnifier.ruhttp://rearchain.ruhttp://recessioncone.ruhttp://recordedassignment.ruhttp://rectifiersubstation.ruhttp://redemptionvalue.ruhttp://reducingflange.ruhttp://referenceantigen.ruhttp://regeneratedprotein.ruhttp://reinvestmentplan.ruhttp://safedrilling.ruhttp://sagprofile.ruhttp://salestypelease.ruhttp://samplinginterval.ruhttp://satellitehydrology.ru
    http://scarcecommodity.ruhttp://scrapermat.ruhttp://screwingunit.ruhttp://seawaterpump.ruhttp://secondaryblock.ruhttp://secularclergy.ruhttp://seismicefficiency.ruhttp://selectivediffuser.ruhttp://semiasphalticflux.ruhttp://semifinishmachining.ruhttp://spicetrade.ruhttp://spysale.ruhttp://stungun.ruhttp://tacticaldiameter.ruhttp://tailstockcenter.ru
    http://tamecurve.ruhttp://tapecorrection.ruhttp://tappingchuck.ruhttp://taskreasoning.ruhttp://technicalgrade.ruhttp://telangiectaticlipoma.ruhttp://telescopicdamper.ruhttp://temperateclimate.ruhttp://temperedmeasure.ruhttp://tenementbuilding.rutuchkashttp://ultramaficrock.ruhttp://ultraviolettesting.ru

  15. #15

  16. #16

  17. #17

  18. #18

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •