I finally field tested this little stove I made out of some pieces of coat hanger & an old Tuna fish can. I used the side cutters of my multi-tool to cut the coat hanger "grill pieces" to size 7 the pliers to bend them once they were placed in the top holes. I poked 6 holes in the top of the can along the rim with the awl from my Swiss Army knife, 3 on each side across from each other; & a series of holes along the bottom to draw in air. Used it with a Tryoxolene Tab & it heated up a small container of water just fine! Also it only takes about 10 minutes to put together.![]()



Reply With Quote
Bookmarks