-
sheetmetal roofing
Sheetmetal roofing is handier than a coat pocket. Due to economics I usually use roll roofing, it's cheap and when the wallet is about empty it'll do. If I had our old shingle mill I would mill out shingles from some cedar but alas it was sold to a old engine club. Shakes are a little more challenging due to the lack of good timber so the next best thing is metal roofing. I call it good ole barn tin.
this weekend I started to reroof the trapping shack. The roofing went on pretty good especially due to the nature of the construction, most of it was eyeballed and built from rough cut lumber and poles.
I'm taking advantage of the awesome nice weather and getting some outside projects done.
anyhoo thanks for looking
http://i257.photobucket.com/albums/h...dytlee/044.jpg
http://i257.photobucket.com/albums/h...tlee/045-1.jpg
-
-
Great looking work. I sure do see a lot of knives in those traps.:innocent:
-
thanks for the comments fellas.
me to on the knives however if the trap will still pinch a few toes I can't bring myself to cannibalize it.
here's a trapspring knife I made awhile back, it's the one with the big copper rivets.
http://i257.photobucket.com/albums/h...dytlee/126.jpg
-
I love a metal roof, up here in the north almost everyone has one. First they are great for shedding those big snow falls as long as you have a good pitch to your roof, also they are great for rain collection if fresh water is a concern.
One of the things I like the most about them is the southing sound when the rain falls.
On a side note randyt, if you haven't been to the thread I did on axe handles you might want to head there for your next replacement handle for that axe in the knife picture.
http://www.wilderness-survival.net/f...l-Bunyan-proud
-
I like useing the metal roofing as well......shed additions are steel.
Do it once and for get it......
-
Love the trapper cabin randyt!
-
Ole Randy doin work! Nice roof man!
-
Thanks for the comments. I'm always building or working on something or another.
My first tin roof was given to me by a neighbour. There was a old house on his property and all I had was roll roofing on my cabin. So I went to see if he would sell me the tin from that old house, bless his heart he gave it to me. He didn't want me to take anything but the tin. That was a lot nicer than roll roofing.
-
In my area corrogated metal has goten so expensive you can not afford it! The price has trippled in the past 3-4 years.
I love the stuff too. Last house I built I put tin on the front and back porches just so I could hear the rain fall on it.
-
I'm with you guys on the rain. I've always loved the sound of it. Not so my youngest grand son. He got a lesson first hand of rain on a metal roof. He's five and crawled up next to me.
"Does that sound annoy you," he asked.
"Actually, I enjoy listening to it."
"It annoys me. Couldn't they use soft rain?"
"Hmmm. I'll talk to someone about that for you."
"Thank you. Soon?"
Great job on the roof!!
-
I have been eyeballing some old chicken house damaged by hurricane "Hugo" I need some metal roofing and Kyrat is right, it is durn expensive!
-
Tin roofs are expensive but I wonder if a cost analysis was done compared to other roofing how tin would actually fare cost wise. I've used tin that had been installed on a few different roofs and it just keeps getting recycled over and over. Yup I'm a unrepentant scrounger among other things LOL. The tin used on the shed was new though, I believe it was $2.29 a linear foot. It's unpainted galvanized roofing.
-
I'll bet that YCC might have some info regarding metal vs other types of roofing material.
-
That would be nice if YCC chimed in. Although I hope he doesn't look close at my tin job, it's not near what a pro would have done. It's a barn yard job so to speak.
-
First off got to give you a thumbs up on the cabin, the roof ,the knives and the traps. Love it. Metal roofing is both easy and expensive unless you can find some that is reusable. As we now raise three different pure breeds of chickens I recently found myself in need of some new chicken houses. I was lucky enough to find a couple a few miles from here that had a hundred pieces of corrugated tin laying around that they wanted to sell. Ran from 8ft to 12 ft long and 29" wide. Anyway I got it all plus several shorts for a bit over $200. Compare that to about $14.50 for an 8ft sheet at either Lowe's or HD and I'm pretty happy with my purchase. A little time spent with the caulk gun ( to fill the odd hole), some good primmer and paint has turned that pile of tin into two pretty good looking coops.Oh yeah. I also bought a stack of lumber from them. 2x4 and 2x6's 8 to 14ft real cheap so saved big money on the coops. Pays to look around a bit. BTW Around here the cost difference between corrugated roofing and shingles is about $20 dollars a square(shingles cheaper) not counting sheeting and felt under the shingles.
Oldtrap
-
Well, I have change out the roll roofing on the Blue Room twice in 20 years, and the original steel roofing on the Tajhma shed lean-to's are still there......I thinking after two re-roofs you pretty much break even.
Blue room is a "A" frame camper, that I set up permanently as a guest room back when, now a shed..........
-
Did you put your screws in the valleys? Wont they leak like that?
-
for years we would nail in the ridges then they came out with rubber washer screws and screwed through the ridges. Then I noticed all the roofers were fastening through the flats. Haven't seen a problem probably due to the rubber washer. things are always changing.
-
I think YCC said in another thread the rubber washer will rot and cause a leak. YCC?
-
Page 4 goes into little detail. In the areas I've worked in that's the norm, not saying it's correct but warranty on a metal roof involve proper screw placement. We use to use lead capped nails and then the industry went to rubber washer nails and now these screws. I've not seen a problem with rotting rubber washers. If that's the case there would be huge problems with rubber membrane roofs, which I haven't seen. Can't ay that the rubber formulation hasn't changed.
http://files.buildsite.com/dbderived...rived44736.pdf
-
Might be the climate, too. It's summer year round at YCC's house.
-
I was thinking that too, deep humid south LOL I wonder if it could possibly been a bad run of rubber. I've been to atlanta and noticed rubber membrane roofs, that's about as far south I've been except fot east texas.
-
They use the rubber washered screws here also. I have a couple buildings that have been up for several years now and don't appear to be leaking because of washer failures.Btw a couple sheds I've taken down for the tin had just plain old nails holding the tin on them. Must be an east Texas thing .Huh?
Oldtrap
-
'Btw a couple sheds I've taken down for the tin had just plain old nails holding the tin on them."
east texas don't have the market cornered on thin wallets LOL
-
-
-
-
-
-
-
