How would you add a handle to this blade? I understand it must be a one piece handle obviously, bottom welded with a pommel?
http://img521.imageshack.us/img521/6955/blade120dr4.jpg
http://img521.imageshack.us/img521/b...jpg/1/w892.png
Printable View
How would you add a handle to this blade? I understand it must be a one piece handle obviously, bottom welded with a pommel?
http://img521.imageshack.us/img521/6955/blade120dr4.jpg
http://img521.imageshack.us/img521/b...jpg/1/w892.png
Ummmmm. What blade?
Edit: Aha - you added a pic.
you could weld it, or thread the tang. threaded tangs can be tightened, welded tangs have to be re-welded when they come loose, I would screw something onto itQuote:
Originally Posted by h8mtv
What's the length of the blade and overall length h8mtv?
Blade is 2.25", OAL around 7" or so.
Another option could be to drill and then rivet or bolt a handle on.
Notch the shank a bit more, tape the cutting edge to work with.
Take a deer antler of the right length/dia./feel, drill a slot out similar shape as the shank.
Form a finger guard in brass to go over the shank close to the blade.
mix epoxy.
Fill slot with enough epoxy to just ooze out as you insert the shank into the antler.
Press fit the handle the last few thousants, compress and let dry.
Now find a V notch in a tree, insert handle and wait (oh no wrong post:D)
Sorry couldn't help myself the voices made me do it:eek:
we might want to try a honey sucle vine for this one!Quote:
Originally Posted by tsitenha
It had passed my mind to epoxy it into a carved handle.
Fit a guard, silver solder, drill a hole thru measured handle, add epoxy, push thru handle, add washer, peen end, shape handle, washer & guard to size after or thread end and either recess and peen end, shape plug & epoxy to fill hole or better yet buy a Scandi for $10.
You know that sticky tape that they put on hockey sticks. I can have a good handle on that puppy in under 2 min.
Stacked leather washers shaped to fit, and a screw down end cap?
Lash it to a pole and make a spear.
Buy one WITH a handle!
For my SOG knife that broke, I used a split sapling and fitted the blade in, wrapped the end with sinew, and carved the handle into a more comfortable grip. I also used some Gorilla glue. I would try wielding to if you have the tools and materials. But that "knife" looks odd.
You mean you didn't split the sappling and let it grow around the blade?????????
What? No, you remind me of that one thread with the axe.
Or.....................................are you being smart...........................???????;/
crash being smart........... naaaaa :rolleyes:Quote:
Originally Posted by Jericho117
Smart????? Nah - never happen.