Making Cypress Bark Tiles
We recently acquired a 12" diameter Cypress trunk about 12' long. I wanted to remove the bark and install it as a column in our home. The log had been lying in a low area was so fairly water logged. The bark came off basically in 2 halves the length of the trunk. Pretty interesting material I thought with vibrant colors so I save the bark halves.
Moving forward I had the idea to make bark tiles. I have dried it out to allow me to better saw it. I am thinking of sawing the halves slightly over 12" to allow me to flatten the 12" sections, before cutting down to 6" X 6" tiles. Because the trunk had been in the low spot it will also need to be cleaned. I was wondering about maybe using a 5 gallon bucket of Pine Sol to both soak and clean the bark? I looked into the main ingredients listed below:
Ingredients:
Water
C10-12 Alcohol Ethoxylates
Fragrance
Hydroxyethylcellulose
Liquitint Lemon Dye
Sodium C14-17 Sec-Alkyl Sulfonate
Sodium Carbonate
Anyone have thoughts on this project? I am just putting it together.
Thanks,
CS
