62" Take Down reflex deflex longbow (PIC HEAVY)
I did a build-a-long on another site and though yall may want to see it as well. I just included the pics in order that the bow was made. I made this bow from scratch including the laminates inside the limb. She is 62" long, 6" brace height and 45lbs with traped limbs.
These pics show the progression from lumber to laminates. I am using pignut hickory.http://i822.photobucket.com/albums/z...s/101_0314.jpghttp://i822.photobucket.com/albums/z...s/101_0316.jpg
The sander I built for sanding the lamintes
http://i822.photobucket.com/albums/z...s/101_0324.jpg
Here are our laminates and I added zebra wood for an attractive face of the bow
http://i822.photobucket.com/albums/z...101_0318-1.jpg
Here it is all glued up into a blank
http://i822.photobucket.com/albums/z...s/101_0345.jpg
I have laide the design of the riser on this block of dymonnd wood
http://i822.photobucket.com/albums/z...s/101_0347.jpg
here is our blank glued up and out of the oven and form.
http://i822.photobucket.com/albums/z...s/101_0352.jpghttp://i822.photobucket.com/albums/z...s/101_0349.jpg
I have drill the holes for the Take Down bolts and index pins
http://i822.photobucket.com/albums/z...s/101_0353.jpg
http://i822.photobucket.com/albums/z...s/101_0355.jpg
Limb butt overlays are on to cover the holes we drilled
http://i822.photobucket.com/albums/z...s/101_0356.jpg
http://i822.photobucket.com/albums/z...s/101_0360.jpg
The limbs are assembled and attached
http://i822.photobucket.com/albums/z...s/101_0361.jpg
Here are the riser and limbs
http://i822.photobucket.com/albums/z...s/101_0364.jpg
The bow after it has been tillered
http://i822.photobucket.com/albums/z...s/101_0374.jpg
A shot of the riser
http://i822.photobucket.com/albums/z...s/101_0375.jpg
The final product except for being sealed. I trapped the limbs as well. That means the cross section of the limb looks like a trapazoid. this makes the limb lighter and faster.http://i822.photobucket.com/albums/z...s/101_0376.jpg
Hope yall enjoyed the show!