Results 1 to 12 of 12

Thread: Char Cloth and Altiods tin

  1. #1

    Default Char Cloth and Altiods tin

    How much should i put in the tin?
    How and how tightly should i pack it?


  2. #2
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,844

    Default

    Here are a few pics of a batch I made. You could put in one piece if you wanted to, or you could put a bit more in than in the pics.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.
    Can't Means Won't

    My Youtube Channel

  3. #3
    Hall Monitor Pal334's Avatar
    Join Date
    Nov 2008
    Location
    New Jersey
    Posts
    4,432

    Default

    Well,, thank you Crash, I have been reading the various discussions on char cloth and could never figure out a way to make it. Your pictures made me "see the light". Now I get it. Thanks again
    .45 ACP Because shooting twice is silly... The avatar says it all,.45 because there isn't a.46

    http://www.youtube.com/watch?v=lTs6a...eature=related

  4. #4
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,844

    Default

    You're quite welcome. I played around with several heat sources. Camp stove, candles, camp fire, propane torch. Single candles didn't put out enough heat to get the job done. Multiple candles would (got impatient).
    Can't Means Won't

    My Youtube Channel

  5. #5
    Wolverine RunsWithDeer's Avatar
    Join Date
    Dec 2008
    Location
    Michigan
    Posts
    301

    Default

    This is a great explanation, the pics really help. It was a search on making char cloth that brought me to this site.

  6. #6
    Senior Member
    Join Date
    May 2007
    Location
    North Georgia Mountains
    Posts
    2,222
    Blog Entries
    9

    Default

    I just throw the tin on the outside of the fire. Once it is done, wash the tin, rub it down with fine steelwool, then rub a layer of wax on it. The wax prevents it from rusting. Then put your char in, take a thin piece of leather and put over the char, then you have room for a steel and a chunk of flint.

  7. #7
    Loner Gray Wolf's Avatar
    Join Date
    Dec 2007
    Location
    Within My Mind
    Posts
    1,999

    Default

    Great show and tell Crash!
    "A person is not finished when they are defeated.
    A person is finished when they quit."

  8. #8
    Member
    Join Date
    Dec 2008
    Location
    Southern NH, USA
    Posts
    64

    Default

    Being really dense, how long does this process take (using the method in the initial note as a bench mark)?

    Rich

  9. #9
    Senior Member flandersander's Avatar
    Join Date
    Nov 2007
    Location
    Chief Executive Officer of All Operations
    Posts
    797

    Default

    There is really no time, because it depends on how much you have in the tin and the temps. The only sure fire way to tell is when the hole in the tin stops emitting smoke. That tells you the oxygenfree combustion is complete.

  10. #10
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,844

    Default

    Quote Originally Posted by RichNH View Post
    Being really dense, how long does this process take (using the method in the initial note as a bench mark)?

    Rich
    Flanders is right with the time. It will depend on how much cloth, how high the heat is, etc. In the pics, with that stove set on low it took about 3 - 4 minutes. Did a batch with a propance torch in under 2.
    Can't Means Won't

    My Youtube Channel

  11. #11

    Default

    i fill a metal cannister with 100% cotton cloth, close it and actually set it in the fire on the coals, i dont take it off the coals until i see it stop smoking out of the pilot hole in the tin when it cools, i cover with tape to waterproof it.

  12. #12
    Administrator Rick's Avatar
    Join Date
    Nov 2007
    Location
    Central Indiana
    Posts
    58,828

    Default

    Fill a soup can with cotton cloth, invert it and slide it into a vegetable can. Poke a tiny hole in the bottom of the soup can and set it on the fire. You'll see a flame appear out of the hole and when the flame goes out you're done.
    Tracks Across the High Plains...Death on the Bombay Line...A Touch of Death and Mayhem...Dead Rock...The Griswald Mine Boys...All On Amazon Books.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •