placards
Not sure if the title is the correct term. I'm looking for a placard about the size of a pack of cigarettes. I've seen a plastic material about a 1/8 th inch thick, red in color, white on the inside. The outside is engraved and the white shows through. I want make up a few for my gas cans and attach them to the handle with a tie of some sort. This way I can keep track of my mixed gas. Haven't had a problem but don't want a problem either.
so the definition of a criminal is someone who breaks the law and you want me to believe that somehow more laws make less criminals?
Osha labels/tags?
Geezer Squad....Charter Member #1
Evoking the 50 year old rule...
First 50 years...worried about the small stuff...second 50 years....Not so much
Member Wahoo Killer knives club....#27
Is this what you are looking for?
Guests can not see images in the messages. Please register in the forum.
If it is, go to you local trophy shop. Tell them you want an engraved nameplate. They will make whatever you want. Size, colors, what it says are all up to you.
I have to order them at work. We get them through a sign shop.
”There's nothing glorious in dying. Anyone can do it.” ~Johnny Rotten
that's the one. I have some on some buckets of gear oil.
so the definition of a criminal is someone who breaks the law and you want me to believe that somehow more laws make less criminals?
Those are called laminated engraved nameplates. Lamicoid, phenolic, and bakelite is another name for the material. Almost all towns have a vendor that will engrave them for you.
Sir Knife Collectin, Rocket Ridin, Girl Crazy Post
Hoe of WSF
I tried to use a color code tags for my fuels; gas, 2 cycle, kero. diesel.
Over the winter I forgot what the code was!
Best to label or engrave them for sure.
If you didn't bring jerky what did I just eat?
Lamitec, phenolic and bakelight are all HPL or High Pressure laminates. They are expensive and chip too easily when tooled.
Looks like you are looking for this stuff.
http://www.rowmark.com/rotary/Rotary..._Materials.asp
It's a softer plastic, easily engraved with a rotary tool. They also have laser engravables but I don't like them they fall apart any time children are involved...they pick the letters off the laser cut stuff. The engraveable stuff is darn near indestructible.
They have a list of distributors at the top of the site.
While a lot of sign shops can get the material, not quite so many actually engrave on site. Many outsource it. Look for someone who does ADA signage, or as mentioned above, a trophy/nameplate shop.
Last edited by LowKey; 05-22-2017 at 08:51 PM.
If we are to have another contest in…our national existence I predict that the dividing line will not be Mason and Dixon's, but between patriotism & intelligence on the one side, and superstition, ambition & ignorance on the other…
~ President Ulysses S. Grant
Or just get these:
http://www.xpresstags.com/engraved-t...FRtYDQodxGoI-A
If we are to have another contest in…our national existence I predict that the dividing line will not be Mason and Dixon's, but between patriotism & intelligence on the one side, and superstition, ambition & ignorance on the other…
~ President Ulysses S. Grant
I make my own from recycled heavier colored plastic jugs. Cut them the size and shape I want, our of the color I want, mark them with a Sharpie or paint stick (I also have engraved them with an electric engraver), and either drill a hole in a corner or use a hole punch for attaching them. They have lasted a decade or more so far.
Posting Permissions
Reply With Quote
Bookmarks