Results 1 to 5 of 5

Thread: belt grinder belt question

  1. #1

    Default belt grinder belt question

    what would be th best belts for a 2x72 grinder for fast stock removal,
    so far i've been using plain 36-60 gr a-ox belts and they take forever and cook the metal,
    i have to keep a water pail next to the grinder. so any thoughts out ther from the mor experienced knifemakers.
    coyotes listen to them, like children of the night what music they make.


  2. #2
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    42,882
    Blog Entries
    1

    Default

    Any grinding you do will heat the metal. It does not matter what type of belt you use.
    Can't Means Won't

    My Youtube Channel

  3. #3
    Senior Member kyratshooter's Avatar
    Join Date
    Apr 2010
    Location
    KY bluegrass region-the center of the universe
    Posts
    9,177

    Default

    A pail of water beside the grinder is SOP. You have to control the temperature and stock removal with any belt or grinding device will have heat as part of the physics involved with grinding a knife.

    Many of the big knife factories actually grind under water.

    As for speed in stock removal, I have used a graduated system in the past for working on big knives, It begins with an angle grinder, moves to the bench grinding wheel, then to the belt sanders and then to finer belts, then the polishing systems to be finished off on a buffing wheel.

    Small knives, I stick with the belt sanders.

    And patience is the key to good craftsmanship. Most people are not going to build a high quality knife by the end of the week if they start after lunch on Friday.
    We came here to have family fun so shut up and make a freekin' smore!

  4. #4
    Senior Member
    Join Date
    Dec 2012
    Location
    Purcell, Oklahoma
    Posts
    573

    Default

    I use Norton Blaze orange 80g belts, they run cooler than any other belt I have tried, they also cut faster than any other belt I have tried. I have never felt I needed to remove stock any faster than what the 80g belts do. They are not very efficient with wood and other items stick with the cheep metal oxide belts for handle work, IMOP. Blaze Orange also last longer.
    Without counsel purposes are disappointed: but in the multitude of counsellers they are established.

    s.pottscustomknives@gmail.com
    www.facebook.com/s.pottscustomknives
    http://s1248.beta.photobucket.com/us...llss7/library/

  5. #5

    Default

    +1 on the Blaze ceramics. They run very cool because they cut so fast- not a lot of time to build up heat. So far those Norton Blaze are the fastest things I have found. Steel melts like an icicle in a hot cast iron pan.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •