Results 1 to 1 of 1

Thread: half hitching - hiding the ends

  1. #1
    Senior Member asemery's Avatar
    Join Date
    Apr 2011
    Location
    Pennsylvamia, USA
    Posts
    369

    Default Carabiner Cover half hitching - hiding the ends

    Guests can not see images in the messages. Please register in the forum.
    Here is how I buried the ends in the half hitching around the carabiner I recently posted

    Tie overhand knot around ring, short tag end. Pull down tag end parallel to ring.
    Guests can not see images in the messages. Please register in the forum.

    Tie half hitch around ring and tag end. Pull tight.
    Guests can not see images in the messages. Please register in the forum.

    Continue half hitching until desired length. Tie at least 4 loose half hitches reeve Working End through these hitches.
    Guests can not see images in the messages. Please register in the forum.

    Starting with loop in top center (second loose loop). One at a time. Tighten the remaining loops (four loops in all)
    Guests can not see images in the messages. Please register in the forum.
    Guests can not see images in the messages. Please register in the forum.
    Guests can not see images in the messages. Please register in the forum.
    Guests can not see images in the messages. Please register in the forum.

    Pull working end and trim
    Guests can not see images in the messages. Please register in the forum.
    Last edited by asemery; 09-13-2015 at 11:24 PM.
    Happily tangled in my nets at
    http://pineapple.myfunforum.org/index.php?c=7


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •