1st up is a 7 3/4" hunter in Alabama Damascus and stabilized black Ash burl, this handle was complete done by hand, I started out with a 8" 1/2 round file and finished with 1000g sand paper, for what that's worth, and buffed with pink compound.
7 3/4" total
3 1/4" blade @ 5/32 stock thickness Alabama Damascus
handle is stabilized Black Ash Burl, brass bolster, blue g-10 stacking, with brass Mosaic pins
sheath is 8-90z tanned leather dyed saddle tan, simple barb wire border.
Guests can not see images in the messages. Please register in the forum.
Guests can not see images in the messages. Please register in the forum.
Guests can not see images in the messages. Please register in the forum.
2nd up to bat 9 1/2" hunter in cmp154cm and lava flow Kirinite
9 1/2" OAL
blade is 4 1/4" @ 3/16" stock thickness cmps154cm with sand blasted finish
handle is lava flow Kirinite with eleven 1/16" nickel silver pins and one 1/4" nickel lanyard tube
sheath is 8-9oz leather dyed black simple barb wire border.
Guests can not see images in the messages. Please register in the forum.
Guests can not see images in the messages. Please register in the forum.
Guests can not see images in the messages. Please register in the forum.
3rd is a semi forged knife, I like to say that because the knife was generally shaped via forging but completely finished on belt grinder, as it was created from an odd scrap of steel I had laying in the bone pile. Any way this one is 1095 hc clay quenched and acid etched.
8 3/4 OAL
blade is 3 1/2" clay quenched and acid etched to bring out Hamon
handle is elk horn with copper bolster
sheath is 8-8oz leather dyed saddle tan.
Guests can not see images in the messages. Please register in the forum.
Guests can not see images in the messages. Please register in the forum.
Guests can not see images in the messages. Please register in the forum.
Bookmarks