Results 1 to 1 of 1

Thread: Water Bottle Carrier - How to Make

  1. #1
    Senior Member asemery's Avatar
    Join Date
    Apr 2011
    Location
    Pennsylvamia, USA
    Posts
    615

    Default Water Bottle Carrier - How to Make

    Guests can not see images in the messages. Please register in the forum.
    I do not have a step by step tutorial but here is how I made the net.
    I used the grommet start http://www.wilderness-survival.net/f...-Grommet-Start adjusted to fit my water bottle. I used a 1' wide gauge. I made 7 loops which with the drop knot made 8 loops (meshes) around.
    I tied 12 rows which was sufficient to cover my water bottle.
    To make the handle I started tying again but only tied into the first 3 meshes (leaving 4)
    After 7 rows I finished it the same way I finished the modification to the net bag discussed here http://www.wilderness-survival.net/f...t-Bag-Tutorial post #2, step #4.
    The final knot was tied into the bag rather than into the handle as shown in the example. Obviously tie into only one mesh at a time when tying into the body of the net.

     
    Last edited by asemery; 03-07-2013 at 06:59 PM.
    Happily tangled in my nets at
    http://pineapple.myfunforum.org/index.php?c=7


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •