iok i have seen alot about flint knapping does anyone know how to do this or have insturtions on how to do this because i want to learn how to flint knap
iok i have seen alot about flint knapping does anyone know how to do this or have insturtions on how to do this because i want to learn how to flint knap
Go over to paleoplanet at
http://b16.ezboard.com/bpaleoplanet69529
they have a beginners board.
Great site with a bunch of great people. Tom started it years ago and he is just a good guy. We did an arrow exchange years ago with gents from all over the US.
Thanks for that link FVR
A wise person does at once, what a fool does at last. Both do the same thing; only at different times.
ive read about it and i want to het into it but its like hard from my understnading of the book but thier useing biug words and all...idk
~~ADDITCED TO JESUS!~~
ALLWAYS WEAR GLOVES AND SAFETY GLASSES
EITHER DO THIS PROJECT OVER A TARP SITTING FO THE FRONT 2 LEGS GO ON THE TARP THEN (IF USING THE TARP) POUR INTO GARBAGE CAN OR THROW TARP AWAY
I WILL NOT BE HELD RESPONSIBLE FOR THE IDIOTS WHO GET HURT FOR NOT TAKING ADEQUIT SAFETY PRECAUTIONS
I just got back from a survival camp and in the last day they taught us how to make arrow heads out of broken bottels the same basic principles are true for stome work
when you flake a stone or glass it brakes in a perfect cone of 100 or 105 degrees
what you need is
- a decent sized rock i.e hammer stone
- and this thing called a pressure flaker
(i made a pressure flaker by going to the hardware
store and buying a hose clamp and some solid brass
wire thats like 3/16 to 1/4 of an inch thick, then got
a piece of wood that was a convinient handle shape
and drilled a hole in it just barly big enough for like
2 or 3 in of wire inside then cut an x in the side with
the hole that were an inch deep then stick 2/3 in of
wire inside then tightened the hose clamop on it, and
finaly file the wire to a fair point, but not super pointy)
this was $2.52 s opposed to buying one form $10 to $20
online
after you do this break a bottle so you have the bottem
and some shards attatched to it
(wear gloves and safty glasses)
when flaking flip it over after each flake if you are working in the same area on the bottle
-then break of the shards carefully off holding the bottem
in your hand so that only the piece you are chipping at
with the rock is out of your hand with hammer stone
-after the extra glass on the sides is off you should have
a circle shape of glassleft
-then chip gently on the bottem side (the side that was
in the actual bottle itself) until the rim is gone all the way
around using the hammer stone
-then you should start to shape it into a triangle shape for
the arrow/ shear head still using the hammer stone
when chipping (flaking is what its really called) there should be pieces that fall off that loook like little fan blades this is good these are what make the sides sharp
after a flake falls off thismakes a ledge then you flip the glass piece over and do the same on the ledge created
you go around the glass piece until there is basicaly only ledges left then work them into a triangle shape with the hammer stone
after you have your triangle you may use your pressure flaker
-using the same ledge flake theory go aroung and fine tune the
arrow/sprear head
remember the indians didnt spend forever making a perfect arrow head so
dont make it perfect just make it useable
-after you should have a more defined triangle of glass for the arrow head
- when you think you are done with the shape of your arrow hwad it is time for notches for tieing the arrow/spear head to whatever, carefully in 2 of the corners start to notc them in the desired way with the pressure flaker fliping it over after each flake until it reaches the desired spot
if you have done it right then you should have an arrow/shear head in your hands if not its way easyer to learn if you see some one do it(like i did)
hints: if pressure flaker hard to use then sharpen it,
when starting off bottems of jars and wine bottles are easyer to use since they are bigger and thicker so if you screw up your not as screwed,
if your bottle breaks with a vertical side you can use the pressure flaker to fix this, but it is easier to just break another bottle
Last edited by kid; 07-18-2007 at 07:55 PM.
Worth a bump for those wanting to get into Knapping. For those that don't know Kid, he's a very talented knife maker +.
"A person is not finished when they are defeated.
A person is finished when they quit."
This is a Gaters foot Rope knife The design was taught to me by the cherokeeGuests can not see images in the messages. Please register in the forum.
God lives in the Mountain, Serve the Master, The Mountain also serves the Master. Serve the Mountain,
The Mountain Breaks you.
http://www.youtube.com/trapperjacksurvival
http://s567.photobucket.com/albums/ss113/erunkis
This is an Axe headGuests can not see images in the messages. Please register in the forum.
God lives in the Mountain, Serve the Master, The Mountain also serves the Master. Serve the Mountain,
The Mountain Breaks you.
http://www.youtube.com/trapperjacksurvival
http://s567.photobucket.com/albums/ss113/erunkis
This is a few arrow headsGuests can not see images in the messages. Please register in the forum.
God lives in the Mountain, Serve the Master, The Mountain also serves the Master. Serve the Mountain,
The Mountain Breaks you.
http://www.youtube.com/trapperjacksurvival
http://s567.photobucket.com/albums/ss113/erunkis
This is an "Oyster" shucking knifeGuests can not see images in the messages. Please register in the forum.
God lives in the Mountain, Serve the Master, The Mountain also serves the Master. Serve the Mountain,
The Mountain Breaks you.
http://www.youtube.com/trapperjacksurvival
http://s567.photobucket.com/albums/ss113/erunkis
Which Wilderness School based on the Cherokee Indians did you go to, Canada? Georgia?
"A person is not finished when they are defeated.
A person is finished when they quit."
Just to show you a few native american designs that i have learned to duplicate. Knapping is fun and functional. larger stuff is difficult because of the pressure it takes to break the stones, and also the methods used to get the piece
God lives in the Mountain, Serve the Master, The Mountain also serves the Master. Serve the Mountain,
The Mountain Breaks you.
http://www.youtube.com/trapperjacksurvival
http://s567.photobucket.com/albums/ss113/erunkis
God lives in the Mountain, Serve the Master, The Mountain also serves the Master. Serve the Mountain,
The Mountain Breaks you.
http://www.youtube.com/trapperjacksurvival
http://s567.photobucket.com/albums/ss113/erunkis
But which school, the name? If you don't mind.
"A person is not finished when they are defeated.
A person is finished when they quit."
Tuscaloosa
God lives in the Mountain, Serve the Master, The Mountain also serves the Master. Serve the Mountain,
The Mountain Breaks you.
http://www.youtube.com/trapperjacksurvival
http://s567.photobucket.com/albums/ss113/erunkis
Erun............
Here ya go, finished these about two weeks back. The biggy, is my 4th Caveman Kabar. I made this one to keep, but then just gave it away to a good friend. Gonna have to make another.
Guests can not see images in the messages. Please register in the forum.
The small one I'm keeping for the auction here. It is rainbow obsidian blade, the handle is from my first bow killed deer, and it's wrapped up with elk leg sinew. The picture does not do the obsidian any favors.
FVR, as usual, NICE WORK!
"A person is not finished when they are defeated.
A person is finished when they quit."
Frank, you are a very talented man!!
Tracks Across the High Plains...Death on the Bombay Line...A Touch of Death and Mayhem...Dead Rock...The Griswald Mine Boys...All On Amazon Books.
Great work Frank.
Thanks thoes are nice, the rainbow obsidion stone is cool I have a couple small pieces of that, but there nothing like yours. Thanks FVR
God lives in the Mountain, Serve the Master, The Mountain also serves the Master. Serve the Mountain,
The Mountain Breaks you.
http://www.youtube.com/trapperjacksurvival
http://s567.photobucket.com/albums/ss113/erunkis
Bookmarks