Results 1 to 9 of 9

Thread: Another Pig Sticker

  1. #1
    Senior Member Skinner's Avatar
    Join Date
    Jan 2011
    Location
    Florida
    Posts
    492

    Default Another Pig Sticker

    Well the Last Pig Sticker I Made Was Sold Before I Was Finished .So After Posting Pic of it On My FB Page I Was Contacted to Make another and The Person Wound Up Get 3 Knives Total They Just Were Sent out Yesterday But Here's the Pig Sticker
    Also Made from a Nickilson File .They Wanted the Same Wood So it's Purple Heart.
    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.
    The Mark In the Middle of the Sheath is the Brand that Was Put on the Cow .Looks Like it Just fits.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.


    And Here's All 3 Blades Before I Sent them to there New Home

    Guests can not see images in the messages. Please register in the forum.
    To Fail Is to Learn from your Mistakes and Advanced off of that Failure.


  2. #2
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,846

    Default

    Well done.
    Can't Means Won't

    My Youtube Channel

  3. #3
    Senior Member BornthatWay's Avatar
    Join Date
    Oct 2010
    Location
    Staunton,Va
    Posts
    867

    Default

    Nice knives as always.

  4. #4
    Senior Member hunter63's Avatar
    Join Date
    Jul 2009
    Location
    SE/SW Wisconsin
    Posts
    26,866

    Default

    Very nice....thanks for posting.
    Geezer Squad....Charter Member #1
    Evoking the 50 year old rule...
    First 50 years...worried about the small stuff...second 50 years....Not so much
    Member Wahoo Killer knives club....#27

  5. #5

    Default

    sweet great job

  6. #6

    Default

    Great looking blade and sheath. Question what steel do you use in you blades.

  7. #7

    Default

    Awesome!!!

  8. #8
    Senior Member Skinner's Avatar
    Join Date
    Jan 2011
    Location
    Florida
    Posts
    492

    Default

    Quote Originally Posted by Wingman View Post
    Great looking blade and sheath. Question what steel do you use in you blades.
    I Used a Nickilson File For this One.But I Use Found Steels When I Can .
    Files/Lawn Mower Blades/Edger Blades/Pry-Bars/Crowbars/Leaf Springs and Many other Steels
    So People I Know Have Been Calling Me a Eco-Friendly/Green Knife Maker Due to the Steels and Items I Use In My Knife Making.

    The Blade With the Micartaand Wood Handle Was Made From a Bandsaw Blade
    And the Small Clip Point Knife Was Made From a pry-Bar
    Last edited by Skinner; 06-03-2012 at 11:10 PM.
    To Fail Is to Learn from your Mistakes and Advanced off of that Failure.

  9. #9

    Default

    great...nice knives u have there...

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •