Page 1 of 2 12 LastLast
Results 1 to 20 of 30

Thread: Crashcarta Wrap Knife - WIP

  1. #1
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,844

    Default Crashcarta Wrap Knife - WIP

    The newest knife I'm working on will have a brightly colored (hopefully) Crashcarta wrap around a hidden tang with a brass finger guard and brass butt cap.

    The basic shape is cut out with an angle grinder.

    Guests can not see images in the messages. Please register in the forum.

    The pommel end is shaped to receive the butt cap

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    My high tech band saw is used to cut the brass. The band saw is a portable that I picked up at a flea market. I normally use it as pictured, with the handle clamped in a vise. I still need to replace the guide arm with a flat table (small), but it works.

    Guests can not see images in the messages. Please register in the forum.

    The hollow grind has been completed. The holes have been drilled in the brass, and the filing on the finger guard hole has been completed.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Although not really necessary for this type of finger guard, I am going to pin and silver solder it just to make it more secure. Here the hole is drilled to fit a 1/8" brass rod. The butt cap will be secured by peening the end of the tang and silver soldering.

    Guests can not see images in the messages. Please register in the forum.

    Here the knife is drilled (carbide bit) to receive the brass rod for the finger guard.

    Guests can not see images in the messages. Please register in the forum.

    Tomorrow is heat treat (and maybe temper) day.
    Can't Means Won't

    My Youtube Channel


  2. #2
    Senior Member Winter's Avatar
    Join Date
    Aug 2010
    Location
    SE Alaska
    Posts
    3,171

    Default

    Wow Crash, pinning that guard is massive overkill. Carta wrap and a peened butcap is solid as a rock.

    Looking good. I love your simple blade shapes. Just looks like it'll work.
    I had a compass, but without a map, it's just a cool toy to show you where oceans and ice are.

  3. #3
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,844

    Default

    Yeah - I know it's over kill. I just don't want any parts to ever come loose - besides - I need the practice.
    Can't Means Won't

    My Youtube Channel

  4. #4
    Senior Member BornthatWay's Avatar
    Join Date
    Oct 2010
    Location
    Staunton,Va
    Posts
    867

    Default

    Hey Crash that knife sounds familiar should I recognize it?

  5. #5
    Junior Member
    Join Date
    Jun 2011
    Location
    Ontario Canada
    Posts
    4

    Default

    that looks like a very useful blade shape.

  6. #6
    American Patriot woodsman86's Avatar
    Join Date
    Feb 2009
    Location
    WNC
    Posts
    655

    Default

    Looking great, can't wait to see the finished product.
    "The object of war is not to die for your country but to make the other bastard die for his."
    -General George S. Patton, Jr.


    VISIT MY EBAY STORE

  7. #7
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,844

    Default

    Finished the heat treat (1525 degrees) and the tempering (450 degrees for 2 hours X 2) last night.

    Guests can not see images in the messages. Please register in the forum.

    The guard is pinned and silver soldered.

    Guests can not see images in the messages. Please register in the forum.

    Butt cap is peened in place.

    Guests can not see images in the messages. Please register in the forum.
    Last edited by crashdive123; 06-20-2011 at 10:47 PM.
    Can't Means Won't

    My Youtube Channel

  8. #8
    Lone Wolf COWBOYSURVIVAL's Avatar
    Join Date
    May 2009
    Location
    In The Swamp Sumter, S.C.
    Posts
    4,515

    Default

    Looking good! Thanks for adding heat treat pic! What steel is it? or do you know?
    Keep in mind the problem may be extremely complicated, though the "Fix" is often simple...

    "Teaching a child to fish is the "original" introduction to all that is wild." CS

    "How can you tell a story that has no end?" Doc Carlson

  9. #9
    Senior Member Skinner's Avatar
    Join Date
    Jan 2011
    Location
    Florida
    Posts
    492

    Default

    Looking Real Good ,Keep It Up and Show Us How your Doing the Micarta Wrap .Looks Like Something New to Try

  10. #10
    Senior Member
    Join Date
    May 2007
    Location
    North Georgia Mountains
    Posts
    2,222
    Blog Entries
    9

    Default

    WOW! That looks to be a great knife.

  11. #11
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,844

    Default

    Quote Originally Posted by COWBOYSURVIVAL View Post
    Looking good! Thanks for adding heat treat pic! What steel is it? or do you know?
    3/16" thick, 1-1/2" wide 1095.
    Can't Means Won't

    My Youtube Channel

  12. #12
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,844

    Default

    Quote Originally Posted by Skinner View Post
    Looking Real Good ,Keep It Up and Show Us How your Doing the Micarta Wrap .Looks Like Something New to Try
    Will do....
    Can't Means Won't

    My Youtube Channel

  13. #13

    Default

    Nice looking knife so far, looking forward to seeing it finished.
    I Wonder Who was the first person to look at a cow and say, "I think I'll squeeze these dangly things here, and drink what ever comes out?"

  14. #14
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,844

    Default

    Should get to the handle wrap tomorrow. As you can see from the materials, it should be a knife that won't get lost.

    Guests can not see images in the messages. Please register in the forum.
    Can't Means Won't

    My Youtube Channel

  15. #15

  16. #16
    Lone Wolf COWBOYSURVIVAL's Avatar
    Join Date
    May 2009
    Location
    In The Swamp Sumter, S.C.
    Posts
    4,515

    Default

    Crash, I started on the Kukri sheath tonight..In contrast it is gatorhide and pig skin.....
    Keep in mind the problem may be extremely complicated, though the "Fix" is often simple...

    "Teaching a child to fish is the "original" introduction to all that is wild." CS

    "How can you tell a story that has no end?" Doc Carlson

  17. #17
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,844

    Default

    Did the wrap early this morning. (very messy) I did a vid of it as well - I'll put that up later. The shaping process will start late this afternoon.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.
    Can't Means Won't

    My Youtube Channel

  18. #18
    Senior Member Winter's Avatar
    Join Date
    Aug 2010
    Location
    SE Alaska
    Posts
    3,171

    Default

    Wow, that is messy. With all those colors, can we call it the San Fran Survival Knife?
    I had a compass, but without a map, it's just a cool toy to show you where oceans and ice are.

  19. #19
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,844

    Default

    Quote Originally Posted by Winter View Post
    Wow, that is messy. With all those colors, can we call it the San Fran Survival Knife?
    Walt Disney after a drinking binge.
    Can't Means Won't

    My Youtube Channel

  20. #20
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,844

    Default

    I just spent a couple of hours shaping and sanding. I got a little too aggressive in one spot though. The nice thing about making things - when you screw up you have a pretty good idea (most of the time) on how to fix it. I had to wrap and tape a small area - should be ready for sanding later. One good thing about temps in the upper 90's is that your fiberglass resin sets up quick. Of course - one bad thing about temps in the upper 90's is that your fiberglass resin sets up quick.
    Can't Means Won't

    My Youtube Channel

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •