Results 1 to 5 of 5

Thread: Few More Knives Finished

  1. 05-18-2011, 10:51 AM #1
    Skinner
    Skinner is offline
    Senior Member Skinner's Avatar
    Join Date
    Jan 2011
    Location
    Florida
    Posts
    492

    Default Few More Knives Finished

    Here's a Few More Knives I Finished .
    I'm Starting to Outgrow My Little HF 1x30 Sander for What I'm Wanting to Do .And Also the Fact All HF Carries for Belts Is 40/80 and 120 grit for it So After getting what i can Get Done At 120 Grit It's All Hand Sanding from there .
    But Here They Are .
    Guests can not see images in the messages. Please register in the forum.
    Handle Is Tosted Bamboo

    Guests can not see images in the messages. Please register in the forum.
    Light Oak With a Classic Oak Stain and Poly Finish

    Guests can not see images in the messages. Please register in the forum.
    Handle Is Cork All Hand Buffed to 2000 Grit

    Guests can not see images in the messages. Please register in the forum.
    Handle Is Orange/White Micarta(Wife Calls It cream cicle)

    Guests can not see images in the messages. Please register in the forum.
    Handle Is White Oak with A Red Mahogany Stain(Sheath is Deer Hide )
    Reply With Quote Reply With Quote

  2. 05-18-2011, 12:31 PM #2
    crashdive123
    crashdive123 is offline
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,843

    Default

    You've been busy. Well done.
    Can't Means Won't

    My Youtube Channel
    Reply With Quote Reply With Quote
  3. 05-18-2011, 01:35 PM #3
    Rick
    Rick is offline
    Administrator Rick's Avatar
    Join Date
    Nov 2007
    Location
    Central Indiana
    Posts
    58,828

    Default

    Nice job. Those are some good lookin' sharps.
    Tracks Across the High Plains...Death on the Bombay Line...A Touch of Death and Mayhem...Dead Rock...The Griswald Mine Boys...All On Amazon Books.
    Reply With Quote Reply With Quote
  4. 05-24-2011, 10:34 PM #4
    oldtrap59
    oldtrap59 is offline
    Senior Member
    Join Date
    Mar 2010
    Location
    woods of east texas
    Posts
    838

    Default

    Getting caught up here with the knife guys. Nice work there Skinner. If you don't mind me asking, what did you use for the blade blanks? Son and his family came for a visit a couple weeks ago and brought me a whole box full of mower blades and I'm going to try doing some pieces using them. Just checking to see what other guys are using as I don't have the metal stock or the experience many of the knife folks have.

    Oldtrap
    Last edited by oldtrap59; 05-24-2011 at 10:37 PM.
    Never claimed to be an expert. Just use or do what works for me.
    Reply With Quote Reply With Quote
  5. 05-25-2011, 01:37 AM #5
    Skinner
    Skinner is offline
    Senior Member Skinner's Avatar
    Join Date
    Jan 2011
    Location
    Florida
    Posts
    492

    Default

    Quote Originally Posted by oldtrap59 View Post
    Getting caught up here with the knife guys. Nice work there Skinner. If you don't mind me asking, what did you use for the blade blanks? Son and his family came for a visit a couple weeks ago and brought me a whole box full of mower blades and I'm going to try doing some pieces using them. Just checking to see what other guys are using as I don't have the metal stock or the experience many of the knife folks have.

    Oldtrap
    At the Moment I'm Useing Some Bar Stock I'm Getting from HD till I Get Better At Making Blades . Since I Have Only Been Doing this For Just Under 6 months Or So Since Joing the Fourm.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules