AH HA!! it worked and the pics are HUGE.
Those pics will show you basically what I've been up to. Minus the last 2 wires (green and brown) for the amp gauge that I didn't have time to tie in. Basically what you're seeing - starting on the left of the first pic:
Switch to the internal work light I installed
then the fuse blocks - with 2 positive / soldered bridge cables to the intellipower controller/charger
then the intellipower 9200 series charger
then the double outlet utility box (the orange thing plugged in is just a circuit tester)
then way on the right is the black switch that i kept from the old components to turn the intellipower system on/off.
the silver box in the lower middle is just a 110 junction box to terminate the old line that was hardwired into the old univolt. It then allows me to split and carry the current to the necessary things I added into the system.
Bookmarks