i must ask that all expert knife makers look away. veiwing the below pictures may cause serious injury or death do to extreme laughter or pity. you have been warned,
this knife took me ten minutes to make. it is an old ppocket knife blade that i grinded the bcak into a dip and sharpened that back (not the dip). then i cut a peice of wood from an old project and used a saw to cut a notch in wood at the top. then i pu a nail through it. i pulled the nail out and slid the blade into the notch. since it was in a pocket knife it had a small hole on the base of the blade. i put the nail thorugh that (this keeping the blade on the wood) and grinded away the nail. i then put two small peices of wood into the remaning space of the notch. i then put electric tape around the meeting place . . . alot of tape : /
taped down the handle just for cover and there is my horrible knife.
Bookmarks