Page 1 of 3 123 LastLast
Results 1 to 20 of 56

Thread: Alaskan Bush Knife

  1. #1
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,844

    Default Alaskan Bush Knife

    Alaskan Bush Knife – at least I hope so. The knife started out with an idea that Kevin had, and put on paper.

    Guests can not see images in the messages. Please register in the forum.

    First came the steel. It is 1095 and is 3/16” thick.

    Guests can not see images in the messages. Please register in the forum.

    Rough shape.

    Guests can not see images in the messages. Please register in the forum.

    Rough grind. I’m getting better at my hollow grind. Going to the right is easier than to the left for me. Not sure if it is because of the motor on the grinder that causes me to have to change my grip, or my conservative nature.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Things can get lost pretty easy when you set them down, so orange scales were in order. I have had difficulty finding orange material in the weight I wanted for the micarta. I tried felt in the past and was very disappointed with it. This called for some medium weight canvas and some orange Rit dye.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Now to make the micarta.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Waiting on the glue to dry on the scales.

    Guests can not see images in the messages. Please register in the forum.

    I used 3/16” brass pins. To make them “grab” the glue better I chucked the rod up in a drill and ran it through an 80 grit piece of sand paper to rough it up.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    The scales have been rough sanded with a 50 grit belt.

    Guests can not see images in the messages. Please register in the forum.

    I then used 120, 220, 400, 600 grit belts and gave it a quick pass on the buffer. I still need to sharpen it and clean it up a little before I send it out. I hope you enjoy it Kevin.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.
    Can't Means Won't

    My Youtube Channel


  2. #2
    Lone Wolf COWBOYSURVIVAL's Avatar
    Join Date
    May 2009
    Location
    In The Swamp Sumter, S.C.
    Posts
    4,515

    Default

    Very Nice! Crash! Wow is that red or orange? I really like it!
    Keep in mind the problem may be extremely complicated, though the "Fix" is often simple...

    "Teaching a child to fish is the "original" introduction to all that is wild." CS

    "How can you tell a story that has no end?" Doc Carlson

  3. #3

    Default

    Man That's a Beauty Crash!! Kevin You are very Lucky! Good thing Crash likes you huh?

  4. #4
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,844

    Default

    Quote Originally Posted by COWBOYSURVIVAL View Post
    Very Nice! Crash! Wow is that red or orange? I really like it!
    Orange. As I started sanding the scales it looks as though the dye didn't penetrate through and through, so it was a lot darker/brighter before I sanded.
    Can't Means Won't

    My Youtube Channel

  5. #5
    Neo-Numptie DOGMAN's Avatar
    Join Date
    Apr 2008
    Location
    cyber space
    Posts
    2,030

    Default

    wow! unbelievable...what a project, and quick work, he didn't post that very long ago...

  6. #6
    Banned
    Join Date
    Jan 2008
    Location
    Chugach National Forest
    Posts
    9,795
    Blog Entries
    10

    Default

    WOW, Crash you have advanced quickly. Nice work.

  7. #7
    Senior Member Camp10's Avatar
    Join Date
    Sep 2009
    Location
    Western PA
    Posts
    2,937

    Default

    Great looking knife! I have got to try to make scales like those!!

  8. #8
    Hall Monitor Pal334's Avatar
    Join Date
    Nov 2008
    Location
    New Jersey
    Posts
    4,432

    Default

    Like the kids would say: Awesome dude!!!! It would appear you are ready for the big time
    .45 ACP Because shooting twice is silly... The avatar says it all,.45 because there isn't a.46

    http://www.youtube.com/watch?v=lTs6a...eature=related

  9. #9
    Neo-Numptie DOGMAN's Avatar
    Join Date
    Apr 2008
    Location
    cyber space
    Posts
    2,030

    Default

    wow...it was less than 2 weeks ago that Kklak posted that! awsome turn around time. approximatly how many hours and much money did that cost you to make?

  10. #10
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,844

    Default

    Probably about 20 hours in it.
    Can't Means Won't

    My Youtube Channel

  11. #11
    Banned
    Join Date
    Jan 2008
    Location
    Chugach National Forest
    Posts
    9,795
    Blog Entries
    10

    Default

    Quote Originally Posted by crashdive123 View Post
    Probably about 20 hours in it.

    20 Hours @ $48.00 per hour shop rate (Man & Equipment) = $960.00 now if you could turn out two per week, and "LOOSE" only $760.00 per knife, if you take two weeks off for vacation............you only loose $76,000.00 per year. So if you start in the knife business with $1,300,000.00 at the end of three years you could say. "Hey I have ..............OK, never mind

  12. #12
    Neo-Numptie DOGMAN's Avatar
    Join Date
    Apr 2008
    Location
    cyber space
    Posts
    2,030

    Default

    Quote Originally Posted by Sourdough View Post
    20 Hours @ $48.00 per hour shop rate (Man & Equipment) = $960.00 now if you could turn out two per week, and "LOOSE" only $760.00 per knife, if you take two weeks off for vacation............you only loose $76,000.00 per year. So if you start in the knife business with $1,300,000.00 at the end of three years you could say. "Hey I have ..............OK, never mind
    That reminds me of the old joke...

    "How do you make a small fortune in Montana?"

    answer: move here with a large fortune and open a business...

  13. #13
    Banned
    Join Date
    Jan 2008
    Location
    Chugach National Forest
    Posts
    9,795
    Blog Entries
    10

    Default

    Quote Originally Posted by Jason_Montana View Post
    That reminds me of the old joke...

    "How do you make a small fortune in Montana?"

    answer: move here with a large fortune and open a business...

    How to finish your first year as a Alaskan Hunting Guide with $200,000.00 in your pocket.........????? Start the season with $500,000.00 but only crash two new super cubs.

  14. #14
    Senior Member Ted's Avatar
    Join Date
    Jan 2010
    Location
    Bryant, IL
    Posts
    804

    Default

    WOW!.......WOW!..... I speachless!

    Ok maybe not, man that thing is buetious! You are "DA MAN!"
    I'm a simple man, of simple means, turned my back on the machines, to follow my dreams.

  15. #15
    Senior Member Pict's Avatar
    Join Date
    May 2008
    Location
    Belo Horizonte Brazil
    Posts
    906

    Default

    Livin' large. That looks great. I'm sure that knife will have some stories to tell. Mac
    The Colhane Channel TV for guys like me.

  16. #16

    Default

    Wow Sweet knife.
    I really need to try making them scales like that. they look great
    I Wonder Who was the first person to look at a cow and say, "I think I'll squeeze these dangly things here, and drink what ever comes out?"

  17. #17
    Over Taxed Under Paid Swamprat1958's Avatar
    Join Date
    Oct 2008
    Location
    Monroe, LA (Northeast LA)
    Posts
    426

    Default

    Great looking knife. Did you temper the steel Crash?

  18. #18
    Super Moderator crashdive123's Avatar
    Join Date
    Jan 2008
    Location
    North Florida
    Posts
    44,844

    Default

    Quote Originally Posted by Swamprat1958 View Post
    Great looking knife. Did you temper the steel Crash?
    Oops. Forgot pictures of the heat treat process. After cleaning the scales and carbon off (last picture) I tempered it in my wife’s oven. It must be hers – she keeps saying what are you putting in my oven?

    Here’s the magnet I use to check it along the way.

    Guests can not see images in the messages. Please register in the forum.

    The heating.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Guests can not see images in the messages. Please register in the forum.

    Time to clean it up a little.

    Guests can not see images in the messages. Please register in the forum.
    Can't Means Won't

    My Youtube Channel

  19. #19

    Default

    You make some pretty knives crash. I really like the "styles?" you use.

  20. #20
    reclinite automaton canid's Avatar
    Join Date
    Dec 2007
    Location
    Central California/West Texas
    Posts
    6,622

    Default

    nice grind, nice knife and well done.

    btw: we have just about the same tongs...
    Any sufficiently advanced incompetence is indistinguishable from malice - Grey's Law.
    --------------------------------------------------------------------------------------------------------------------
    To see what's going on in my knife shop check out CanidArmory on Youtube or on Facebook.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •