converting a 2 1/2 inch chamber to a 2 3/4 chamber

I have a old non noncollectable European shotgun, steel barrels, bolt action that has a 2 1/2 inch chamber. I'm thinking of rechambering to 2 3/4 inch. any thoughts?

ya know got to pondering this and the limited amount I'll be shooting this gun, I'll probably make up or scrounge some 2 1/2 inch shells.

I guess I would be concerned about enough metal to ream out a 1/4 "

Anyway some 2-1/2 shells around....
http://www.ballisticproducts.com/Gam...o/G1225PGF286/

This is a great example of a good use for the Aquilla 1 3/4" minishells.

You can also get those 2 1/2" shells Hunter sourced from Midway if you are used to shopping there.

You have waaaaay too much time on your hands.

not really, yesterday was the first fay I had off in weeks. I ponder all this while driving between locations lol

OK we will change that to "You are not paying nearly enough attention to the road!"

that could be lol... some of these things I ponder on were common practice years ago