How to choose an axe handle that would make Paul Bunyan proud

http://sherertalltales.wikispaces.co..._ox_w_a_hb.gif


Their was a time when wood axe handles were made by hand and you could always be guaranteed to get a good handle, but those days are gone.
I'm a wood carver, I've been working with wood for 31 years and know it's strengths and weaknesses.
I go into the average hardware store and I see axes and axe handles and I'm lucky if I see one out of 10 that I would buy.

Very often I see people that work with wood that don't even know the right axe handle to buy. Just the other day I was at my neighbors place, he makes furniture and even kitchen cabinets and he had some spare Axe handles up on the wall that I glanced at, seeing the grain of the wood, I was surprised he had choose them.
All of them had good potential for breaking or splitting, so not everyone that works in wood knows how to choose a good axe handle.

So here is what I hope will be a good pictorial representation of the right and wrong way to choose an axe/handle.
The right axe handle will last years of safe use, also at the end is a good site to show you how to make your own axe handle.

In the first picture we will look at how the grain should be.

http://www.galleryhosted.com/media/i...RZ0NJQAVEA.jpg

Holding the axe with the blade facing strait down. follow a grain line from the center of the axe head all the way to the bottom of the axe handle, if the grain veers off at any point you will have a week spot where the axe will split or crack and break.

Now lets look at some bad examples, I've put blue arrows to show you the week spots in the grain.

http://www.galleryhosted.com/media/i...RZ0NJQAVEA.jpg

http://www.galleryhosted.com/media/i...RZ0NJQAVEA.jpg

The next one shows one good and one bad

http://www.galleryhosted.com/media/i...Z0NJQAVEA.jpeg

Now test what you've learned, in this next picture which axe handle would you buy?

http://www.galleryhosted.com/media/i...RZ0NJQAVEA.jpg

Follow this link to learn how to make your own axe handle.
http://northernwoodlands.org/knots_a...wn-axe-handle/

here is a site thats reviewing some axes and will back up what I'm saying
Look at his picture to see what I'm talking about (I'm fussier than him)

http://1.bp.blogspot.com/_QnIsgflDDL...w/s400/031.JPG

I guess i would buy SA.....?

Quote:

---

Originally Posted by hunter63

I guess i would buy SA.....?

---

Ditto........

SA would be my pick of the litter.

The question I gave was kind of a trick question, by that all of you would receive a C average. ;)

In the picture of the four axes only (LA) is not worth buying and even that axe would last longer than the examples of bad axes that I gave, because even with the grain going the wrong direction down the side of the axe at least it goes from center of the top to center of the bottom.

http://1.bp.blogspot.com/_QnIsgflDDL...w/s400/031.JPG
http://www.galleryhosted.com/media/i...RZ0NJQAVEA.jpg

Another thing to look for is a tight growth ring pattern, here in the first picture above is the example that the axe reviewer posted, if you look at the handle on the left and compare it to my axe handle with the arrows you will see that mine has at least twice the growth rings as his handle.

More growth rings means more strength, as the tree grew much slower each year. Think of the growth rings as being like laminated plywood the more plies the stronger the sheet, so same with an axe handle, the more growth rings the stronger the handle.
So even though the handle on the left in the first picture has the grain going close to the right way it is still week compared to the three good handles in this picture.(16CX-SA-14CX)

http://www.galleryhosted.com/media/i...RZ0NJQAVEA.jpg

In northern BC we don't find much for hardwood, just the very odd birch tree and lots of scrubby willow, for the walking staffs that I carve I tend to get mine from an area that was damaged by fire, this stunts the growth of the trees so much, that I have to use a microscope to count the rings for some of my Pine staffs.
For example here is a willow staff I made with a Viking theme that was 47 years old when harvested.

http://www.galleryhosted.com/media/i...KZ9ZQ5KXRD.jpg

Here is a pine spear that I made with the same size shaft as above, but this was harvested when it was 75 years old. As you can see it's not any thicker than the average Christmas tree thats probably no more than 7-10 years old.

http://www.galleryhosted.com/media/i...KZ9ZQ5KXRD.jpg

Are you sure it was a Viking theme? Reminds me of the dog in the movie The Mask.

https://encrypted-tbn3.google.com/im...s6VjpaNYexq9RZ

Well considering that the movie the mask is about a Magical wooden mask of Loki, the Norse god of darkness and mischief.
Perhaps the artists were influenced by Norse Dragons as I was. ;)

Great post. This is a question that I have had for a while now. I know people look for a good handle based on grain, but I didn't know what they looked for. I guess is relates to how my dad showed me how to hold the ol' Louisville Slugger. If you held it correctly, the grain strengthened the bat and you wouldn't break it. If you held it wrong, then you could break the bat.

It is a good thread and applies to any type of wooden handle, not just axes. You also want to pay attention if the handle is made from hard wood or soft wood. Soft wood handles can be susceptible to wood worms (I don't know what kind, maybe Crash or someone does. [Powder Post?]) that will turn the handle to a powder inside. I've never seen that happen to a hardwood handle.

Quote:

---

Originally Posted by Rick

It is a good thread and applies to any type of wooden handle, not just axes. You also want to pay attention if the handle is made from hard wood or soft wood. Soft wood handles can be susceptible to wood worms (I don't know what kind, maybe Crash or someone does. [Powder Post?]) that will turn the handle to a powder inside. I've never seen that happen to a hardwood handle.

---

Ya gotta use them, Rick....it's the sitting around that causes worms....LOL.
Still smarting over the trick question, though.....

I know how I got 'em but what about the handles?

You are correct with the common name powder post beetles. There are quite a few species (amborsia, lyctid, anobiid, bostrichid, etc). Some attack softwood, some rs attack only hardwood, while others still attack both.

Well I'll be horn swaggled. I've never seen it in a hardwood handle. But I defer to your experience oh great slayer of all things bug.

Rick, just add that to your list of why you don't want to live in Florida.

Makin' a note brother. Makin' a note.