Tab Content
No Recent Activity
About bulrush

Basic Information

About bulrush
West Michigan


Total Posts
Total Posts
Posts Per Day
General Information
Last Activity
08-06-2012 08:32 AM
Join Date

1 Friend

  1. NorthWindTrails NorthWindTrails is offline

    Voyageur enseignant

Showing Friends 1 to 1 of 1
View bulrush's Blog

Recent Entries

Slingshot zombiehammer with skull ejector

by bulrush on 01-03-2012 at 04:36 PM
This contains a video.

Wow. One end of the weapon is a slingshot. The end contains a steel ball for whacking, and a 6 inch spike for...spiking.

Too much sugar in yogurt!

by bulrush on 01-03-2012 at 11:59 AM
Activia yogurt has more sugar per ounce than a can of Coke. Here are some comparisons. Serving size (oz)/sugar grams/sugar per oz:

Activia 8oz/37g/4.63g
Dannon Oikos yogurt 8oz/27g/3.38g
Coke 12oz/39g/3.25g
V8 Splash juice 8oz/16g/2.0g

For low-fat protein, try jerky instead. It might have a lot of salt, but it is low in sugar and fat.
Social issues

A joke

by bulrush on 06-25-2009 at 07:34 AM

My wife said, "Whatcha doin today?"

I said, "Nothing."

She said, "You did that yesterday."

I said, "I didn't get finished."

Fire starters

by bulrush on 06-16-2009 at 08:26 AM
Here's an easy fire starter to make from cardboard.
- Melt wax from old candles in a double boiler. Takes about 30 minutes.
- Cut 1" x 10" strips from corrugated cardboard boxes.
- Roll strips up and tie with a string.
- Dip these rolls into melted wax, put on safe surface to let dry. Placing on scrap paper (might stick to it), waxed paper, or paper/pan sprayed with non-stick cooking spray works well. Placing on plastic wrap might also work, don't let the

Read More

Updated 06-18-2009 at 09:08 AM by bulrush


Acid etching knife blades

by bulrush on 06-15-2009 at 01:05 PM
I thought I would try acid etching my initials into a knife blade with muriatic acid. If the acid gets masked with masking tape, then cut out my design, then add drops of acid for 4 hours, I think that should do something.

Anyone ever tried acid etching a design into metal?

UPDATE: The acid etching worked though I had to use clear nail polish for a mask. Masking tape didn't work. The picture is here: