If you are a Facebook User you can login without registering using the "Facebook Connect" button at the very top of this page.
Setting Snares To set a snare, the looped end of the snare is suspended over a trail or path that the animal is expected to use. The animal enters the snare, sticking its head through the loop, and through its for-ward progress draws the snare down on itself. It should be noted, that not all animals are snared by catching them around the neck. You will be more successful snaring some animals like raccoon and beaver if the snare cinches up on their body somewhere behind one or both of their ...
Updated 09-02-2008 at 11:52 AM by Beo
Animal Tracks, if your gonna trap you should know what the tracks of your prey look like, as outdoors people here we should all know what these look like, Here are a few. In the tracking chart below you will find many of wildlife species. As trappers and hunters we should be very knowledgeable on what furbearer's we are targeting. And which other critters may be a potential problem in the areas we trap and hunt. How to use this chart: This chart has been broken into groups by track ...
Check it out babypops, you went to all the trouble of preparing your traps and then trapping your furbearing animal, and now what. Here are a few things I do and the way I do it. Proper Pelt Care REMOVAL FROM TRAPS Care should be taken when removing animals from traps especially if they are frozen. Simply prying an animal out of a trap may remove portions of fur and damage pelts. If furbearers are completely frozen in traps, it would be wise to take the furbearer still in the trap ...
Preparing traps is also very important so here's what I do. Others don't use this method but I sell my furs in Friendship Indiana so I take these steps, it helps me hope it helps you. Step #1 Cleaning The first thing that needs to be done to all your traps is for them to be cleaned . Whether the traps are new or used they need to be cleaned properly before dyeing and waxing. Cleaning is accomplished by boiling the traps in water with baking soda. Or for those real nasty traps, ...
Continued from part 1 Step #3 Waxing For this procedure you should use a different clean pot. Save your other pot for boiling and dyeing, but obtain a seperate pot for the waxing process. I wax traps for two reasons. The first is that the wax will protect and seal the trap while it is being used. The wax seals in any odor that may take place while a trap is oxidizing while set. Secodly, the wax also speeds up the closing of the jaws of the trap resulting in, a faster trap and fewer misses. ...
Updated 08-20-2008 at 10:13 AM by Beo