How do you add a handle to this blade?

[h8mtv]

How would you add a handle to this blade? I understand it must be a one piece handle obviously, bottom welded with a pommel?

http://img521.imageshack.us/img521/6955/blade120dr4.jpg (http://imageshack.us)
http://img521.imageshack.us/img521/blade120dr4.jpg/1/w892.png (http://g.imageshack.us/img521/blade120dr4.jpg/1/)

[crashdive123]

Ummmmm. What blade?

Edit: Aha - you added a pic.

[erunkiswldrnssurvival]

How would you add a handle to this blade? I understand it must be a one piece handle obviously, bottom welded with a pommel?

http://img521.imageshack.us/img521/6955/blade120dr4.jpg (http://imageshack.us)
http://img521.imageshack.us/img521/blade120dr4.jpg/1/w892.png (http://g.imageshack.us/img521/blade120dr4.jpg/1/)

you could weld it, or thread the tang. threaded tangs can be tightened, welded tangs have to be re-welded when they come loose, I would screw something onto it

[crashdive123]

What's the length of the blade and overall length h8mtv?

[h8mtv]

Blade is 2.25", OAL around 7" or so.

[rebel]

Another option could be to drill and then rivet or bolt a handle on.

[tsitenha]

Notch the shank a bit more, tape the cutting edge to work with.
Take a deer antler of the right length/dia./feel, drill a slot out similar shape as the shank.
Form a finger guard in brass to go over the shank close to the blade.
mix epoxy.
Fill slot with enough epoxy to just ooze out as you insert the shank into the antler.
Press fit the handle the last few thousants, compress and let dry.

Now find a V notch in a tree, insert handle and wait (oh no wrong post:D)

Sorry couldn't help myself the voices made me do it:eek:

[erunkiswldrnssurvival]

Notch the shank a bit more, tape the cutting edge to work with.
Take a deer antler of the right length/dia./feel, drill a slot out similar shape as the shank.
Form a finger guard in brass to go over the shank close to the blade.
mix epoxy.
Fill slot with enough epoxy to just ooze out as you insert the shank into the antler.
Press fit the handle the last few thousants, compress and let dry.

Now find a V notch in a tree, insert handle and wait (oh no wrong post:D)

Sorry couldn't help myself the voices made me do it:eek:

we might want to try a honey sucle vine for this one!

[h8mtv]

It had passed my mind to epoxy it into a carved handle.

[Ole WV Coot]

Fit a guard, silver solder, drill a hole thru measured handle, add epoxy, push thru handle, add washer, peen end, shape handle, washer & guard to size after or thread end and either recess and peen end, shape plug & epoxy to fill hole or better yet buy a Scandi for $10.

[hopeak]

You know that sticky tape that they put on hockey sticks. I can have a good handle on that puppy in under 2 min.

[Sam]

Stacked leather washers shaped to fit, and a screw down end cap?

[crashdive123]

Lash it to a pole and make a spear.

[Fletcher]

Buy one WITH a handle!

[Jericho117]

For my SOG knife that broke, I used a split sapling and fitted the blade in, wrapped the end with sinew, and carved the handle into a more comfortable grip. I also used some Gorilla glue. I would try wielding to if you have the tools and materials. But that "knife" looks odd.

[crashdive123]

You mean you didn't split the sappling and let it grow around the blade?????????

[Jericho117]

What? No, you remind me of that one thread with the axe.

[Jericho117]

Or.....................................are you being smart...........................???????;/

[Gray Wolf]

Or.....................................are you being smart...........................???????;/

crash being smart........... naaaaa :rolleyes:

[crashdive123]

Smart????? Nah - never happen.

[chiye tanka]

Come on Jericho, you've been here longer then me and even I know Crash no smrt. :D

[nell67]

smart a** maybe:p:D!!!!!!!!!!!!!!!:p

[crashdive123]

I'm shocked!:eek: Shocked I tell ya!:eek:.............Well maybe not.:rolleyes::p

[nell67]

I didn't think you would be!See,it takes one to know one,or so they say!

[trax]

I heard a rumor once that Crash was smart, but it turned out that Crash had started the rumor and he only did it because he was tryinng to be smart. Personally, I'd never try that.

[crashdive123]

You mean it was just a rumor???!!!???

http://www.hep.ucl.ac.uk/~ytl/personal/images/Shocked.jpg

[nell67]

Crash,did you wash your hair this morning????:eek:

[crashdive123]

yep.....can't do a thing with it.

[nell67]

Don't worry about it,just about the time you get ready to wash it again,it will look fine.;)

[crashdive123]

I've noticed that.....especially since I've had it cut.

http://www.adverblog.com/archives/img/wild_hair4.jpg

[nell67]

Hey,you got the Nell look going on there,nice cut!


But you have a little too much color,gotta get some grey going on then it will be perfect.

[chiye tanka]

It looks like Crash is going for that 80's punk look.

[Runs With Beer]

The easiest thing to do is, Drill out a piece of Antler< Epoxy, And where the blade and antler come together, Wrap with a piece of rawhide, Gives it that backwoods homemade look. And if necessary this can be done in the wild. And it looks COOL.