asemery
08-28-2015, 06:24 PM
http://i.imgur.com/KFm8I5H.jpg
see http://www.wilderness-survival.net/forums/showthread.php?27362-Ringbolt-Hitching-Key-Ring in this forum for other ringbolt hitching photos
This is how I did it
With standing end on left of ring bring Working End through ring and make half hitch.
http://i.imgur.com/JauNxLz.jpg
Bring WE through ring and from left to right through crossing point and pull snug
http://i.imgur.com/sP5bRDx.jpg
http://i.imgur.com/yuWnbaB.jpg
Bring WE through ring and repeat above steps
http://i.imgur.com/Lvti8rZ.jpg
When there is roon for only one more hitch bring WE through the ring and UP through the loop holding the Standing End
http://i.imgur.com/3yrVUnV.jpg
Next bring WE through the crossing point and DOWN through the loop
http://i.imgur.com/UdHIhuD.jpg
Pull the standing End down through the loop and the hitching is complete. The ends may be glued or held in place with a contrasting color Turks Head knot
http://i.imgur.com/51P605n.jpg
OR
Turks Head tied with two ends
Make a clockwise loop with left end in front of ring and a counter-clockwise loop with the right end through the loop
http://i.imgur.com/6JtEt6Q.jpg
Bring each end over the strand and through the corresponding loops on top
http://i.imgur.com/efHsely.jpg
Bring each end down across one strand and through the loop on the bottom
http://i.imgur.com/KIpTXOc.jpg
The Turks Head tied with two ends is complete. You can tighten it up and hide the ends or double it by bring each end parallel to the strand just below it
http://i.imgur.com/FRlcgUl.jpg
see http://www.wilderness-survival.net/forums/showthread.php?27362-Ringbolt-Hitching-Key-Ring in this forum for other ringbolt hitching photos
This is how I did it
With standing end on left of ring bring Working End through ring and make half hitch.
http://i.imgur.com/JauNxLz.jpg
Bring WE through ring and from left to right through crossing point and pull snug
http://i.imgur.com/sP5bRDx.jpg
http://i.imgur.com/yuWnbaB.jpg
Bring WE through ring and repeat above steps
http://i.imgur.com/Lvti8rZ.jpg
When there is roon for only one more hitch bring WE through the ring and UP through the loop holding the Standing End
http://i.imgur.com/3yrVUnV.jpg
Next bring WE through the crossing point and DOWN through the loop
http://i.imgur.com/UdHIhuD.jpg
Pull the standing End down through the loop and the hitching is complete. The ends may be glued or held in place with a contrasting color Turks Head knot
http://i.imgur.com/51P605n.jpg
OR
Turks Head tied with two ends
Make a clockwise loop with left end in front of ring and a counter-clockwise loop with the right end through the loop
http://i.imgur.com/6JtEt6Q.jpg
Bring each end over the strand and through the corresponding loops on top
http://i.imgur.com/efHsely.jpg
Bring each end down across one strand and through the loop on the bottom
http://i.imgur.com/KIpTXOc.jpg
The Turks Head tied with two ends is complete. You can tighten it up and hide the ends or double it by bring each end parallel to the strand just below it
http://i.imgur.com/FRlcgUl.jpg