asemery
10-28-2014, 06:29 PM
This method of cordage making takes up very little room. It is a goood way to use gutted paracord strands to make especially strong small rope. you can vary the color and size of the threads used, use your imagination. If you can count to three you will have no problem with the braiding disk.
Take a square of cardboard and cut off the corners to make an octagon. I used the top of a pizza take out box and made a 4" square (size of square is not critical). Cut a 3/4" (again not ctitical) slit on center of each side of the octagon. Cut a hole in center of square. Take 7 strands of cord and tie overhand knot in one end.
http://i.imgur.com/u82Zo3M.jpg
Push overhand knot in center of hole and put one strand each in seven slits leaving the empty slit in the East (3 o'clock) position. Clip a light weight (bulldog clip) to the knot.
http://i.imgur.com/u3CIT7m.jpg
I find it easier to move the disk in a counter-clockwise direction but you can move the disk clockwiase as long as you are consistant. Count over 3 positions clockwise and take the cord there (red cord, south-west position) and move it up to the empty slot. Shift the disk counter-clockwise so the empty slot is in the East (3 o'clock) position.
http://i.imgur.com/7zW48Mm.jpg
That is all there to it. Count over three clockwise, move the cord there to the empty slot, and turn the disk so the empty slot is at the East.
http://i.imgur.com/pDUzk9I.jpg
http://i.imgur.com/SqXr2hu.jpg
http://i.imgur.com/orJ0DQv.jpg
http://i.imgur.com/hup94rG.jpg
Will bring us to here. When the white cord is moved to the empty slot the cords will once again be in the be starting order.
http://i.imgur.com/1gcQxTy.jpg
http://i.imgur.com/Bxs4fh4.jpg
Continue in this manner until finished. Tie end in overhand knot.
You will get an unholy mess on your hands if you don't straiaghten out the cords from time to time
http://i.imgur.com/q3CumOW.jpg
Take a square of cardboard and cut off the corners to make an octagon. I used the top of a pizza take out box and made a 4" square (size of square is not critical). Cut a 3/4" (again not ctitical) slit on center of each side of the octagon. Cut a hole in center of square. Take 7 strands of cord and tie overhand knot in one end.
http://i.imgur.com/u82Zo3M.jpg
Push overhand knot in center of hole and put one strand each in seven slits leaving the empty slit in the East (3 o'clock) position. Clip a light weight (bulldog clip) to the knot.
http://i.imgur.com/u3CIT7m.jpg
I find it easier to move the disk in a counter-clockwise direction but you can move the disk clockwiase as long as you are consistant. Count over 3 positions clockwise and take the cord there (red cord, south-west position) and move it up to the empty slot. Shift the disk counter-clockwise so the empty slot is in the East (3 o'clock) position.
http://i.imgur.com/7zW48Mm.jpg
That is all there to it. Count over three clockwise, move the cord there to the empty slot, and turn the disk so the empty slot is at the East.
http://i.imgur.com/pDUzk9I.jpg
http://i.imgur.com/SqXr2hu.jpg
http://i.imgur.com/orJ0DQv.jpg
http://i.imgur.com/hup94rG.jpg
Will bring us to here. When the white cord is moved to the empty slot the cords will once again be in the be starting order.
http://i.imgur.com/1gcQxTy.jpg
http://i.imgur.com/Bxs4fh4.jpg
Continue in this manner until finished. Tie end in overhand knot.
You will get an unholy mess on your hands if you don't straiaghten out the cords from time to time
http://i.imgur.com/q3CumOW.jpg