Skinner
08-20-2011, 10:42 AM
Found this On another Site thought I'd Share it With Everyone
Here's the Fourm I Got it From( http://www.archerytalk.com/vb/showthread.php?t=719191&page=1 )
I picked up some Maple veneer at the Home Depot and cut it into strips that are just slightly larger than the knife's tang.
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife5.jpg
I want each layer to be a different color so I am using Rit dye to stain the wood.
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife8.jpg
I decided to use camo colors. Black, Brown, Green and tan.
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife6.jpg
The three batches that I dyed curled so I dried them with a rag and then pressed between two boards to dry.
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife7.jpg
I glued up the layers with carpenter glue and let them sit overnight.
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife91.jpg
I cut them down to the rough size in order to get them ready to mount them to the knife tang.
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife92.jpg
I added the laminated handle sides to the knife with epoxy and brass pins I also did some rough sanding as well. So far, Im getting the results I had hoped for.
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife94.jpg
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife95.jpg
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife93.jpg
I'll Be Trying this Soon When I Can Get some funds for Supplys
Here's the Fourm I Got it From( http://www.archerytalk.com/vb/showthread.php?t=719191&page=1 )
I picked up some Maple veneer at the Home Depot and cut it into strips that are just slightly larger than the knife's tang.
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife5.jpg
I want each layer to be a different color so I am using Rit dye to stain the wood.
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife8.jpg
I decided to use camo colors. Black, Brown, Green and tan.
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife6.jpg
The three batches that I dyed curled so I dried them with a rag and then pressed between two boards to dry.
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife7.jpg
I glued up the layers with carpenter glue and let them sit overnight.
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife91.jpg
I cut them down to the rough size in order to get them ready to mount them to the knife tang.
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife92.jpg
I added the laminated handle sides to the knife with epoxy and brass pins I also did some rough sanding as well. So far, Im getting the results I had hoped for.
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife94.jpg
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife95.jpg
http://i259.photobucket.com/albums/hh320/Scoobie236/Miss%20Pics/lastknife93.jpg
I'll Be Trying this Soon When I Can Get some funds for Supplys