PDA

View Full Version : i dont know if you call this "prinituve technology"



Go_army2
05-21-2007, 05:33 PM
but does any one know and can give advice on napping flint or making a sharp edge on flint? beacuse i have a 50 cal. fintlock rifle and my flint is getting dull....any suggestions? thanks :)

Tony uk
06-10-2007, 03:14 PM
Get a piece of flint about the size you want (Not smaller but bigger is fine) use a chisel, Sharp rock, some kind of tool to shape it and then it should work

FVR
06-10-2007, 05:47 PM
When I make flint for rifles, I usually sift through my stash and cut a square piece out of it. I cut it with a pair of tile nippers. Knapping them is not all that hard, a long deertine works well, so does a piece of heavy copper ground rod shoved into the front of a stick.

You can also buy tools specifically for knapping fun flint. All it really is is a piece of copper with a v notch in it. Others use a little flint hammer.

Check out a variety of buckskinning sites, ask about the tool and they will direct you. I just use a deer tine.

Go_army2
07-09-2007, 12:53 PM
thank you for helping me