PDA

View Full Version : How To Profile A Knife Blade



crashdive123
12-12-2010, 04:06 PM
When I made this video I was using a Grizzly grinder (2 X 72 belt sander). I did most of the profiling on the flat platten area of the grinder. Since this video was shot, and based on a recommendation from Camp10, I use the contact wheel for profiling. It seems to go much smoother - thanks Camp10.

Another note - if you do not have a large grinder, using a small, inexpensive bench grinder or an angle grinder can be used.

8AZHCT90MUI

Camp10
12-12-2010, 09:10 PM
[QUOTE=crashdive123;263568]When I made this video I was using a Grizzly grinder (2 X 72 belt sander). I did most of the profiling on the flat platten area of the grinder. Since this video was shot, and based on a recommendation from Camp10, I use the contact wheel for profiling. It seems to go much smoother - thanks Camp10.

Anytime, my friend! Glad I was able to help someone.

Winter
12-12-2010, 09:59 PM
Thanks for posting this. I may finally get my first real belt sander soon.