PDA

View Full Version : Toollogic Sl3



Scaru
08-05-2010, 02:18 PM
I just got the tool logig sl3 which has a built in whistle and firesteel i was wondering if anybody has had any experience with itor any tips

welderguy
08-05-2010, 02:43 PM
Here is one tip I found out the bottom of the tube that holds the fire steel has a little opening and it isn't water proof or at least mine wasn't . I fixed that with a little epoxy it's water tight now. I really like mine it's become my EDC folder.

Scaru
08-05-2010, 03:54 PM
wait specifically where did it leak on yours im looking at mine and i dont see anything

Scaru
08-05-2010, 03:56 PM
for the other people that have this one thing i have realized so far is that you can stuff a bit of tinder in with the firesteel

welderguy
08-05-2010, 06:21 PM
at the very bottom were the tube and knife handle meet, very very small hole but enough to get it damp inside.

crashdive123
08-05-2010, 07:58 PM
Could that hole be for letting moisture out that might happen to get in through the top?