PDA

View Full Version : Pry bar steel



rebel
02-03-2010, 07:58 AM
Do you think the steel in the flat pry bar would make a good knife? They seem springy and the local hardware has them on sale for two dollars.

http://images.search.yahoo.com/images/view?back=http%3A%2F%2Fsearch.yahoo.com%2Fsearch%3 Fei%3DUTF-8%26p%3Dflat%2Bpry%2Bbar%2Bpicture%26type%3Dstartp age_search&w=500&h=500&imgurl=i.ehow.com%2Fimages%2FGlobalPhoto%2FArticle s%2F4903438%2FFlatPryBar_Full.jpg&size=15.8kB&name=FlatPryBar+Full+jpg&rcurl=http%3A%2F%2Fwww.ehow.com%2Fhow_4903438_inst all-bathroom-tub.html&rurl=http%3A%2F%2Fwww.ehow.com%2Fhow_4903438_insta ll-bathroom-tub.html&p=flat+pry+bar&type=jpeg&no=2&tt=143&oid=3a83d214dc3a0ac4&tit=FlatPryBar+Full+jpg&sigr=11prn5n39&sigi=122gigemu&sigb=12kvg44de

crashdive123
02-03-2010, 08:07 AM
I looked around a bit and could only find a couple of references to materials used in that type of pry bar. They were all a carbon steel reference - without being too specific, so I think it'll work. Worst cast scenario is if you buy a couple and the first one doesn't work - you've still got some pry bars.

rebel
02-03-2010, 08:11 AM
Thanks for the info Crash. I think I'll do that for a future project.

your_comforting_company
02-03-2010, 08:29 AM
I use flat-bars religiously in my line of work. I would like to know the results of this experiment. keep us posted!

crashdive123
02-03-2010, 08:37 AM
I know that Cowboysurvival hasn't been on-line as much lately, but you might want to shoot him a pm. In his line of work, he could probably give you the specifics on materials used in them.

COWBOYSURVIVAL
02-03-2010, 10:04 AM
Guys, I might be wrong, but I almost sure that most of them are cast iron. I do no think you can forge the stuff at all. You may be able to cold work it with good results, but not great ones. Just my 2 cents. I'll do some checking when I have time.

rebel
02-03-2010, 01:12 PM
CS,
You may be right about them being cast. Dag-nab-it! I thought I might have found a good and cheap source of knife making steel.

klkak
02-03-2010, 02:27 PM
Cast iron would not make a very good prybar. It is to brittle. I did some internet looking and every reference I could find refered to alloy steel.

Camp10
02-03-2010, 05:18 PM
I have thought about trying them also but havnt really got around to it. I think they must be a spring steel of some type and probably an alloy. I can check the hardness on one later and see what it comes in at. My guess is it is tempered to spring steel (in the 40's) and you would have work out a heat treat formula to make a usable blade out of it.

COWBOYSURVIVAL
02-03-2010, 07:25 PM
Camp, Looks like your spot on. I found a Stanley that was forged tool steel! Rebel you might be onto something after all!

rebel
02-03-2010, 07:34 PM
Camp, Looks like your spot on. I found a Stanley that was forged tool steel! Rebel you might be onto something after all!

You're alright CS! We need to find the best brand of pry bar and the "formula".

COWBOYSURVIVAL
02-03-2010, 07:37 PM
You're alright CS! We need to find the best brand of pry bar and the "formula".

At that price I'd just give it a go just like a file or leafspring! Yeah you can get alot more technical than that but I like just trying stuff.

COWBOYSURVIVAL
02-03-2010, 07:42 PM
http://www.tooled-up.com/MicroCategory.asp?CID=14&SCID=379&MCID=1617#prodlist

Take a look at the specs on the Stanley wonder bar. There are also several that state forged alloy.

rebel
02-03-2010, 07:43 PM
At that price I'd just give it a go just like a file or leafspring! Yeah you can get alot more technical than that but I like just trying stuff.

You're right about that. I learned a new thing today, don't do your colors in the day light. You can get a better idea of the color while you're heating, when it's dark.

COWBOYSURVIVAL
02-03-2010, 07:50 PM
You're right about that. I learned a new thing today, don't do your colors in the day light. You can get a better idea of the color while you're heating, when it's dark.

Do you use a magnet or just go by color? Assuming you are talking about forging and not tempering.

rebel
02-03-2010, 07:51 PM
Do you use a magnet or just go by color? Assuming you are talking about forging and not tempering.

Magnet, after I can see red. A straw color for tempering.

COWBOYSURVIVAL
02-03-2010, 07:57 PM
Magnet, after I can see red. A straw color for tempering.

Same way I do it!

Camp10
02-03-2010, 08:35 PM
It seems the Stanley flat bar I have is differentially treated. I dont know if this was be design or accident but the nail pullers (I guess thats what you would call them) are around 54 Rc while the main body is 45-47 Rc. Mine has been abused but I dont remember it getting into any heat source that may have changed the temper. I would say that if that is the case, this would be a decent knife steel.

your_comforting_company
02-04-2010, 02:50 AM
I use the stanleys because they are flatter on the flat end. I have to agree that they are NOT cast iron because they'd never hold up to the abuse I put them through. I don't know much about steels and all that mumb0-jumb0 1052steel stuff, but they make a good ping when struck. heat from a bernzomatic cylinder with rosebud torch doesn't hurt them, but it's not really very hot, nor exposed for very long when I have to use heat. of all the ones I've tried over the years, the stanley holds up best.

ibosserman
02-05-2010, 09:25 PM
I use a pry bar every day. I have beat the crap out of mine and it barely shows any ware. they do flex when pulling on them. so I know that they are not cast iron. the steel is realy strong. if you had a long one you could probably make an excellent machetty (cant spell this right) oh well you know what I mean.

Ole WV Coot
02-05-2010, 10:53 PM
The ones I have are several years old and made in the USA. I noticed all Stanley tools at Wally's were made in China. I also tap a bar to see if I get a clear ring. I thought I was the only one that still did that.

rebel
03-22-2010, 02:36 PM
Heated, straightened and a little grinding.

pocomoonskyeyes
03-22-2010, 02:56 PM
Looks good Rebel!! Might even make a good Dual purpose tool!

COWBOYSURVIVAL
03-22-2010, 03:19 PM
Keep us posted Rebel! Looks good so far!

crashdive123
03-22-2010, 06:14 PM
I like it. Well done Rebel.

rebel
03-22-2010, 06:18 PM
Do you think that I should cut off the pry part?

I gotta say the steel feels right. It has a good ring. We'll see how it holds an edge when finished.

crashdive123
03-22-2010, 06:21 PM
JMO, but I think it looks good with the prybar and nail puller.

panch0
03-22-2010, 07:02 PM
JMO, but I think it looks good with the prybar and nail puller.

+1 on keeping the nail puller

pocomoonskyeyes
03-25-2010, 01:57 PM
JMO, but I think it looks good with the prybar and nail puller.


+1 on keeping the nail puller

Make that 3 of us!

Rick
03-25-2010, 04:22 PM
I like the idea of the nail puller but I don't know how much leverage you would be able to get. You'd almost have to put your hands on the blade I would think. I'm torn on the pry bar. I'm just thinking about balance. I like the idea but I'm not certain how practical it would be.

It's definitely high on the cool scale as far as I'm concerned. I think you did a nice job.

crashdive123
03-25-2010, 04:26 PM
You could always use it for your flip top beer cans. Wouldn't want to break a nail in a survival situation.

panch0
03-25-2010, 04:40 PM
Survival Beer drinking. I knew I liked you for a reason. Hehehe.....